+421 950 333 113info@handymade.store−10 %Shop now

ALUMINUM BOTTLES

Aluminium Bottle, White Fine Mist Spray, 100 ml

Pack size50 ml100 ml200 ml225 ml

The aluminium bottle with a white mini trigger sprayer is ready-to-use packaging for toners, hydrosols and refreshing mists that are applied by spraying. full description

AvailabilityIn stock · 389 pcs
Product codeO24HS100-OVR24PB
€2.80incl. VAT

Lowest price in the last 30 days: €2.80

Volume pricing
1–199 pcs€2.80Your price
200–999 pcs€2.57−8 %
1000–4999 pcs€2.38−15 %
from 5000 pcs€2.10−25 %

Total for 1 pcs: €2.80

Quantities add up across all combinations of this bottle.

Product description

The aluminium bottle with a white mini trigger sprayer is ready-to-use packaging for toners, hydrosols and refreshing mists that are applied by spraying. Aluminium does not let light through, so light-sensitive contents, such as hydrosols, toners with plant extracts or hair sprays with essential oils, stay protected wherever you put the bottle down. The bottle is lightweight and will not break, which makes it suitable as travel packaging for a handbag or sports bag as well.

The 100 ml volume is a common size for a facial toner or body mist that lasts several weeks. The sprayer with a 24/410 neck finish screws directly onto the neck of the bottle, the two parts fit together without an adapter, and once cleaned the set is ready for filling.


What the set is suitable for

  • Facial toners and hydrosols – thin water-based formulations are sprayed evenly and applied without your fingers touching the skin.
  • Body and hair mists – light sprays with a water or alcohol base, where a small dose and a wider spread matter.
  • Fragrance sprays with essential oils – the aluminium wall protects essential oils from light. We recommend checking how a higher concentration of oils affects the plastic parts of the sprayer.
  • Small batches and samples – when testing a new formulation, it is enough to fill one bottle and observe how the spray behaves in normal use.

How the set dispenses and seals

The mechanical sprayer works without a propellant. Pressing the head draws the liquid up through the tube from the bottom of the bottle and sprays it as a fine mist in a repeatable dose of approximately 0.12 ml. It works best with thin liquids: water, hydrosols, toners, alcohol solutions, or very light emulsions in a spray consistency. Thicker liquids, gels and cream textures cannot be sprayed by the mechanism.

The white head with a smooth collar is tightened onto the thread by hand. Before first use and after each refill, it is worth checking that the collar sits straight and that the bottle does not leak when tilted.

The nominal volume of the bottle is 100 ml, which is the amount it is filled with in normal use. The brimful capacity is the physical volume up to the neck, and the difference provides a reserve for the tube and the sprayer mechanism, as well as for the contents expanding when the temperature changes.

Before the first filling, compare the sprayer tube with the height of the bottle and, if necessary, shorten it with a diagonal cut so that it reaches just above the bottom. A tube that bends at the bottom draws less well and some of the contents stay in the bottle.


Good to know

  • Preparation before first filling – wash the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. The sprayer is flushed by pressing it several times in clean water and then in alcohol.
  • Compatibility with the formulation – we recommend testing the behaviour of the packaging with your specific formulation beforehand, especially with water-based and more acidic formulations and with a higher proportion of essential oils. Leave the first batch in the packaging for several weeks and observe the scent, colour and appearance of the contents as well as the inner wall of the bottle.
  • Preserving the contents – water-based sprays need a preservative even in opaque packaging. The sprayer prevents fingers from touching the contents, but it does not solve the microbial stability of the formulation.
  • Aluminium and mechanical damage – the wall of the bottle can dent if dropped or squeezed hard. This usually does not affect function, but the appearance suffers and the bottle stands less steadily.
  • Another closure – closures with the same 24/410 neck type and ready-made bottle and closure combinations are available in the Handymade range.
  • Recycling – the aluminium bottle belongs with metal packaging and the polypropylene sprayer with plastics. Separate them before disposal.

The set is declared as suitable for contact with cosmetic products, and the declaration of conformity is available with the product.

The set is not approved for contact with food. Use it for cosmetic and fragrance preparations, not for kitchen oils, syrups or drinks.


Frequently asked questions

Does an aluminium bottle protect the contents from light?
Yes, aluminium does not let light through, so the contents are protected from both daylight and UV light regardless of the colour of the bottle surface. It is therefore suitable for hydrosols, toners with plant extracts or sprays with essential oils, whose scent and colour change faster in light. However, light is only one factor – heat and air from frequent opening also affect stability.
How full should a 100 ml aluminium bottle with a sprayer be filled?
Fill it to the nominal volume of 100 ml, not to the brim. The brimful capacity is slightly larger, and the difference provides a reserve for the sprayer tube and for the contents expanding when the temperature changes. If you fill the bottle right up to the neck, part of the contents will be pushed out when the sprayer is screwed on and will run into the thread.
Is an aluminium bottle with a sprayer suitable for oil-based contents?
A mechanical sprayer is not suitable for pure oils and thicker formulations. It works best with thin water-based or alcohol-based liquids, such as toners, hydrosols and hair mists. Thick oil comes out of the nozzle as a stream rather than a mist, and the mechanism gradually becomes clogged. For light oil sprays, we recommend testing the behaviour of the sprayer on a small amount.
Can an aluminium bottle with a sprayer be reused?
Yes, once empty the set can be cleaned and filled again. Wash the bottle, disinfect it with alcohol and leave it to dry. Flush the sprayer by spraying clean water through it first and then ethanol to remove residues of the previous contents from the tube and nozzle. When changing from a formulation with a strong scent, bear in mind that the plastic parts may retain some of the scent.
Can a closure other than the sprayer be used on the 100 ml aluminium bottle?
Yes, the bottle has a 24/410 neck finish, so closures with the same neck type fit it. Suitable closures and ready-made bottle and closure combinations are available in the Handymade range. For your own combination, we recommend testing the seal and dispensing directly with the formulation you will be filling, because each closure behaves differently depending on the viscosity of the contents.

Parameters

Aluminium bottle, 24/410, 100 ml

Product colour
Silver
Country of origin
China
Nominal capacity
100
Brimful capacity
106 ml
Diameter
40 mm
Thread type
24/410
Height
110 mm
Product material
Aluminium

Fine Mist Sprayer, White, Smooth Collar, 24/410

Product colour
White
Country of origin
China
Diameter
27,4 mm
Thread type
24/410
Height
45 mm
Tube length
180 mm
Dose
0,12 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Fine Mist Sprayer, White, Smooth Collar, 24/410 · OVR24PBPDF ↓
PDSProduct Data Sheet
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Fine Mist Sprayer, White, Smooth Collar, 24/410 · OVR24PBPDF ↓
DrawingTechnical drawing
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Fine Mist Sprayer, White, Smooth Collar, 24/410 · OVR24PBPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.