Aluminium Bottle, White FIne Mist Spray, 200 ml

The aluminium bottle with a volume of 200 ml and a white fine mist sprayer is a ready-made set for thin cosmetic products that are applied by spraying. Aluminium does not let light through, so the contents are protected from daylight and UV radiation, and the bottle stays light and unbreakable. The sprayer with a 24/410 neck finish is included in the pack, so there is no need to choose it or test it separately.

Both parts are declared suitable for contact with cosmetics. The silver surface of the bottle is complemented by the smooth white collar of the sprayer.

What it is suitable for

The sprayer disperses each dose into a fine mist, so the set is best suited to formulations with low viscosity:

• Face and body toners – water-based solutions with active ingredients that are applied directly to the skin without a cotton pad.
• Hydrosols and floral waters – light-sensitive contents that the opaque bottle protects from light.
• Hair and refreshing sprays – light water-based or alcohol-based formulations for hair, face or body.
• Room and fabric fragrances – alcohol-based sprays with a fragrance composition, where spraying releases the scent quickly.

Volume and filling

The nominal volume of 200 ml is the volume the bottle is designed for in normal filling. The brimful capacity given in the parameters is the physical volume up to the neck. The difference between them is a reserve for the dip tube of the sprayer and for the expansion of the contents when the temperature changes. Fill up to the nominal volume. If you fill up to the neck, part of the contents is pushed out when the sprayer is fitted.

One press releases approximately 0.12 ml. This indicative figure is useful when estimating consumption or writing instructions for use of the finished product. After fitting the sprayer and tightening the collar, press the head several times without product until the tube fills and the mist starts to come out evenly.

Good to know

Before the first filling, we recommend washing the bottle, disinfecting it with isopropyl alcohol or ethanol and letting it dry completely. The sprayer, including the tube, can be rinsed with ethanol and pumped several times without product so that no water remains in the mechanism.

Aluminium is a metal, so for water-based, acidic or alkaline formulations we recommend checking how the packaging behaves with your specific recipe by means of a test filling. After several weeks, check the colour, scent and appearance of the inner surface. It is also worth testing the tightness and dispensing with products containing a higher proportion of essential oils or solvents, which can affect the plastic parts of the sprayer.

The set is not approved for contact with food; it is intended for cosmetic and similar non-food products. After thorough washing, the bottle can be reused, and the sprayer is rinsed and pumped when the contents are changed. Aluminium and polypropylene are both recyclable materials, so separate the two parts when disposing of them.

You will find closures with the same 24/410 neck finish and ready-made combinations of the bottle with other closures in the Handymade range. If you make your own combination, check the tightness with your specific formulation.

Frequently asked questions