ALUMINUM BOTTLES
Aluminium Bottle, White Spray With Glossy Silver Collar, 225 ml
Pack size50 ml100 ml200 ml225 ml
Aluminium bottle with a white fine mist sprayer and a capacity of 225 ml , supplied as a ready-made set with a glossy silver collar. full description
Lowest price in the last 30 days: €3.19
Save €0.04 with this set
Total for 1 pcs: €3.19
Quantities add up across all combinations of this bottle.
Product description
Aluminium bottle with a white fine mist sprayer and a capacity of 225 ml, supplied as a ready-made set with a glossy silver collar. The metal body does not let light through and does not break if dropped, so it suits products that travel in a bag or stand on a bathroom windowsill. The contents are dispensed in small amounts as a mist, without opening the bottle or pouring.
The set is intended for thin, water-based and alcohol-based products: facial toners, hydrosols, hair sprays, refreshing body sprays, eau de parfum and room or fabric sprays. Both parts have a 24/410 neck finish and are declared suitable for contact with cosmetics. The set is not intended for food.
How the sprayer and bottle work together
The sprayer is made of plastic, with a PP head and an aluminium collar that matches the silver surface of the bottle. One press releases approximately 0.12 ml of the contents. The dip tube reaches the bottom of the bottle, so almost all of the contents can be sprayed out. Before screwing it on for the first time, check the length of the tube and shorten it if necessary so that it does not bend at the bottom.
The mechanical fine mist sprayer is designed for liquids close to water in consistency. Thick gels, emulsions and pure oils do not come out of the nozzle as a mist but as a stream, and the nozzle gradually becomes blocked. For alcohol-based compositions with a high proportion of essential oils or other solvents, we recommend testing the behaviour of the plastic parts by filling a trial bottle.
The bottle is made of aluminium and no information is available about its inner coating. Compatibility with a specific formulation, especially for water-based products with a low or alkaline pH, should therefore be checked in a filled bottle over several weeks. Watch for changes in colour or odour, or for cloudiness.
For your own recipe, fill one bottle as a trial and leave it at normal room temperature for at least a month. If neither the contents nor the sprayer change, you can fill the whole batch.
Nominal and total volume
The nominal volume of 225 ml is the amount the bottle is designed for in normal filling. The total brim-full volume is larger and can be found in the parameters. The difference between the two values leaves room for the sprayer tube, which displaces part of the volume, and for the expansion of the contents when the temperature changes.
Fill to the nominal volume, not to the neck. If the bottle were filled to the top, the contents would overflow when the sprayer is screwed on and could escape past the seal when pressed.
Good to know
- Preparation before first filling – rinse the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Pump the disinfectant through the sprayer several times so that the tube and the nozzle are cleaned as well.
- Reuse – the aluminium bottle can be refilled after washing and disinfecting. Residues of the old contents in the tube and nozzle of the sprayer are carried over into the new filling, so rinse it with warm water and then with disinfectant.
- Impacts – aluminium does not break, but if dropped it can dent, which changes its appearance.
- Storage – store empty packaging in a dry and clean place.
- Closures – the sprayer can be replaced with another closure for the 24/410 neck from the Handymade range, where you will also find ready-made combinations. If you make your own combination, check the tightness and dispensing with your specific filling.
- Recycling – the bottle belongs in metal waste; unscrew the sprayer before disposal and discard it as plastic.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 225 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.


















































