ALUMINUM BOTTLES
Aluminium Bottle, White Spray with Matte Silver Collar, 200 ml
Pack size50 ml100 ml200 ml225 ml
This aluminium bottle with a mini trigger sprayer, 200 ml , is used for toners, hydrosols, hair and body sprays, alcohol-based disinfectant solutions, and fabric and room fresheners. full description
Lowest price in the last 30 days: €3.21
Total for 1 pcs: €3.21
Quantities add up across all combinations of this bottle.
Product description
This aluminium bottle with a mini trigger sprayer, 200 ml, is used for toners, hydrosols, hair and body sprays, alcohol-based disinfectant solutions, and fabric and room fresheners. Aluminium does not let light through, so sun-sensitive contents stay protected even without dark glass. The bottle is lightweight and unbreakable, so it fits in a handbag and is handy at work and when travelling. The set consists of a silver bottle and a white mini trigger sprayer with a matte silver collar. The whole set is suitable for contact with cosmetics.
What it is suitable for
The sprayer disperses thin liquids into a mist, so this packaging works best with low-viscosity products:
- Facial and body toners, hydrosols – they are applied without your hands touching the neck of the bottle, so the contents are less likely to become contaminated.
- Hair sprays and leave-in conditioners – even distribution along the lengths without soaking one spot.
- Alcohol-based solutions – hand disinfectant, yoga mat spray, linen or room freshener.
- Sun care and water-based body sprays – the opaque packaging helps with light-sensitive ingredients.
A mini trigger sprayer dispenses thicker emulsions, gels and strongly oil-based formulations poorly or only in drops, and the nozzle may clog. A bottle with a pump is more suitable for them.
Volume and filling
The nominal volume of 200 ml is the amount the bottle is designed for with normal filling. The brimful capacity given in the parameters is the physical volume up to the top of the neck. The difference between them serves as a reserve for the dip tube of the sprayer and for the expansion of the contents when the temperature changes. For this reason, fill the bottle to the nominal volume, not to the brim. Otherwise the contents are pushed out when the sprayer is screwed on, and the closure may not seal properly.
Before the first filling, wash the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water would dilute the contents and, in water-based products without sufficient preservation, reduce their stability.
Dispensing and spraying
The sprayer screws onto the 24/410 neck finish, the tube reaches the bottom and one press releases a small, repeatable amount. The dose per press is given in the parameters. After filling, prime the sprayer by pressing it several times until the tube draws up the contents. The finest mist is produced with water-based and alcohol-based solutions. As the density or the oil content increases, the droplets become larger.
Other closures from the Handymade range have the same neck type, so you can combine the bottle with a different cap or pump. If you make your own combination, we recommend checking the seal and the dispensing with your specific formulation.
Good to know
Aluminium is a softer material than glass. The bottle does not break, but it may dent if squeezed hard or dropped. For this reason, a full bottle should not be squeezed in the palm like a plastic one.
For formulations with a low pH, a higher alcohol content or essential oils, we recommend testing a single bottle before a larger production run. Check the contents after several weeks (scent, colour, cloudiness, condition of the inside of the bottle) and check the tightness of the closure as well.
The sprayer contains plastic parts made of PP. Concentrated essential oils and solvents can strain the plastic over the long term. With such contents, check that the nozzle does not become sticky and that the closure does not leak.
The packaging can be reused. Between two fillings, wash the bottle with warm water. When you change the product, we also recommend disinfecting the bottle and rinsing the sprayer with clean water so that no residues of the previous contents remain in the tube. The sprayer is a combination of plastic and an aluminium collar, so separate it from the bottle before disposal.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 200 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
























































