+421 950 333 113info@handymade.store−10 %Shop now

PLASTIC BOTTLES

Amber Plastic Bottle, Black Spray, Matte Silver Collar, Smoky Overcap, 200 ml

Pack size100 ml150 ml200 ml300 ml

The amber PET bottle with a capacity of 200 ml and a black mini trigger sprayer is a ready-made set for filling with liquid products that are applied by spraying: toners, hydrosols , hair sprays, refreshing body sprays… full description

AvailabilityIn stock · 17 pcs
Product codeO24PH200-OVR24CSM
€1.35incl. VAT

Lowest price in the last 30 days: €1.35

Save €0.01 with this set

Volume pricing
1–249 pcs€1.35Your price
250–999 pcs€1.25−8 % · 1× plato
1000–4999 pcs€1.16−14 % · 4× plato
from 5000 pcs€1.02−24 % · 20× plato

Total for 1 pcs: €1.35

Quantities add up across all combinations of this bottle.

Product description

The amber PET bottle with a capacity of 200 ml and a black mini trigger sprayer is a ready-made set for filling with liquid products that are applied by spraying: toners, hydrosols, hair sprays, refreshing body sprays or make-up removing waters. The amber colour of the plastic reduces the amount of light reaching the contents and helps protect light-sensitive formulations. PET is light and unbreakable, so the bottle holds up well in the bathroom, when travelling and in retail packaging, where glass would be heavy or at risk of breaking. The black sprayer with a silver matte collar matches the dark bottle, and the set looks complete without any further finishing.

Both the bottle and the sprayer are declared suitable for contact with cosmetic products. The declaration of conformity is available with the product.


What it is suitable for

  • Facial toners and hydrosols – thin water-based solutions are sprayed evenly, and protection from light is welcome with plant infusions and hydrosols.
  • Hair sprays – leave-in conditioner sprays, sea salt sprays or light hair waters that are applied to the lengths without rubbing in by hand.
  • Body and refreshing sprays – the 200 ml volume is enough for everyday use, and the bottle sits comfortably in the hand.
  • Make-up removing and cleansing waters – micellar waters and light cleansing solutions that are sprayed onto a cotton pad or directly onto the skin.
  • Hand and tool sprays – solutions that are dispensed in small amounts and should not run off.

How the set works

The mini trigger sprayer with a 24/410 neck finish draws the contents up through a tube reaching to the bottom of the bottle and disperses them into fine droplets when pressed. One press dispenses approximately 0.12 ml, so the contents are applied in small amounts and are not wasted by spilling. The sprayer works in an upright position. When the bottle is turned upside down, the tube rises above the liquid level and the sprayer starts to draw in air.

The sprayer is designed for liquids with low viscosity. Water-based solutions, hydrosols and thin alcohol or glycerine preparations pass through the nozzle without problems. Thick emulsions, creams and gels either will not spray or will clog the nozzle. If the contents are slightly thicker, we recommend testing the spraying on a small amount first.

After filling the bottle and screwing on the sprayer, press it several times to prime it until the tube fills and the sprayer starts to dispense evenly.


Nominal and total volume

The nominal volume of 200 ml is the amount the bottle is designed for in normal filling. The total brimful volume is the physical capacity of the bottle up to the neck, and you will find it in the parameters. The difference between the two forms a reserve for the sprayer tube and for the expansion of the contents with changes in temperature. Fill up to the nominal volume, not to the brim. An overfilled bottle is difficult to close once the sprayer is screwed on, and the contents may leak around the thread on the first press.


Good to know

Before the first filling, wash the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Check the sprayer tube before fitting it. If it reaches past the bottom and bends in the bottle, shorten it so that it reaches just to the bottom.

The bottle is made of PET, and the sprayer of plastic (PP) and aluminium. The plastic should not be exposed to aggressive chemicals. For formulations with a high proportion of alcohol or with undiluted essential oils, we recommend testing how the packaging behaves with your specific formulation on a single piece. Watch whether the plastic becomes cloudy or deformed over time and whether the sprayer still dispenses the same amount after several weeks.

The set is declared for contact with cosmetics. It is not intended for filling with food, drinks or household oils.

The bottle withstands repeated use. After emptying, rinse it, remove any residue of the contents and disinfect it again. Rinse the sprayer by spraying clean water through it several times and then ethanol. The 24/410 neck is standard, and you will find further closures with the same neck type and ready-made bottle and closure combinations in the Handymade range.

The PET bottle belongs in plastic recycling. The sprayer consists of several materials, including the aluminium collar, so separate it from the bottle before disposal.


Frequently asked questions

Does an amber plastic bottle with a sprayer protect the contents from light?
Yes, the amber colour of the PET reduces the amount of light reaching the contents. This helps with hydrosols, plant infusions and preparations with light-sensitive active ingredients, which would change colour or scent faster in a clear bottle. However, dark plastic is not a complete barrier, so do not leave the bottle in direct sunlight or on a windowsill.
How much liquid should I put in a 200 ml bottle with a sprayer?
Fill the bottle up to the nominal volume of 200 ml. Above this level there is a reserve up to the neck, which is taken up by the sprayer tube and which allows the contents to expand slightly with temperature changes. The exact total brimful volume is given in the parameters. Filling to the brim pushes the contents out when you close the bottle and causes uneven dispensing after the first press.
Is a plastic bottle with a sprayer suitable for alcohol-based toners and essential oils?
Thin water-alcohol solutions, for example facial toners with a lower proportion of alcohol, are commonly filled into it. For a high alcohol content or undiluted essential oils, we recommend testing the behaviour of the PET and the sprayer seals with your specific formulation on a single piece beforehand and watching for cloudiness, deformation or a change in dispensing. The packaging should not be exposed to aggressive chemicals.
Can I dispense oil or a thicker emulsion through the sprayer on a 200 ml PET bottle?
Thicker emulsions and creams cannot be dispensed through a mini trigger sprayer, as the nozzle clogs or the contents come out in a stream instead of a spray. The sprayer works with low-viscosity liquids: water, hydrosols, toners and light alcohol solutions. For thin oils or light spray emulsions, we recommend testing the spray on a small amount before filling the whole bottle.
How do I clean a bottle with a sprayer and use it again?
Empty the bottle, rinse it with warm water, remove any residue of the contents and disinfect it with isopropyl alcohol or ethanol. Clean the sprayer by spraying clean water through it several times and then ethanol, so that both the tube and the nozzle are rinsed. Leave everything to dry completely. Before the next filling, check that the sprayer still draws in liquid and dispenses evenly.
Does any closure other than the sprayer fit the amber 200 ml PET bottle?
Yes, the bottle has a standard 24/410 neck and can be closed with any closure with the same thread type. You will find further closures and ready-made bottle and closure combinations in the Handymade range. For your own combination, we recommend checking the tightness of the seal and the dispensing with your specific formulation, especially with liquids that pour easily.

Parameters

Brown plastic bottle, 24/410, 200 ml

Product colour
Brown
Country of origin
European Union
Nominal capacity
200
Brimful capacity
220 ml
Diameter
51 mm
Thread type
24/410
Height
133 mm
Product material
PETPlastic

Fine Mist Sprayer, Black, Matte Silver Collar, Smoky Overcap, 24/410

Product colour
BlackSilver
Country of origin
China
Diameter
28 mm
Thread type
24/410
Height
45 mm
Tube length
180 mm
Dose
0,12 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Brown plastic bottle, 24/410, 200 ml · O24PH200PDF ↓
Fine Mist Sprayer, Black, Matte Silver Collar, Smoky Overcap, 24/410 · OVR24CSMPDF ↓
PDSProduct Data Sheet
Brown plastic bottle, 24/410, 200 ml · O24PH200PDF ↓
Fine Mist Sprayer, Black, Matte Silver Collar, Smoky Overcap, 24/410 · OVR24CSMPDF ↓
DrawingTechnical drawing
Brown plastic bottle, 24/410, 200 ml · O24PH200PDF ↓
Fine Mist Sprayer, Black, Matte Silver Collar, Smoky Overcap, 24/410 · OVR24CSMPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.