Product description

The ZENISOAPBASE melt-and-pour soap base is used for the production of soaps and soap bouquets. It has a vegetable base and the finished soap has excellent foaming properties and, thanks to its high glycerin content, it also moisturizes the skin very well. It remains liquid for a relatively long time, so it can be used even for more complex projects. During longer standing there is no loss of volume of the soap castings (important especially when creating bouquets). The soap base is free from animal fats and oils – 100% vegan.

When coloring the base with ZENICOLOR colorants, it is better to mix 70% transparent CLEAR base and 30% white WHITE base in order to avoid excessive consumption of colorants.

Melting temperature: 65 °C
Do not exceed a temperature of 75 °C when heating!

Working with the soap base is not difficult at all. Simply cut the required amount of soap base into smaller pieces, which will speed up the melting phase of the base. Slowly heat the base in a water bath or in a microwave. Be careful, the base must not boil, so heat it slowly. Into the melted base you can add a few drops of essential or fragrance oil, liquid or powder colorant and, for extra interest, dried herbs.

Stir slowly to avoid creating unnecessary air bubbles that would form holes after solidification. Pour the soap base into the prepared mold. Immediately after pouring, we recommend applying a few sprays of a bubble remover – this is 99% isopropanol – using a spray bottle. The final step is to let it solidify. After unmolding you can use the soap immediately, but we recommend letting the base rest for about 2 weeks for better properties.

More detailed information about the product quality can be found in the test report, which we update with each new batch.

All supplied raw materials are of cosmetic grade, not suitable for internal use. When handling, use appropriate protective equipment.