Follow the discounted products!
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
The plastic bottle with a glossy surface and transparent dispenser represents a practical and professional-looking packaging for various liquid cosmetic product... read more
0,86 € incl. VAT
The plastic bottle with a glossy surface and transparent dispenser represents a practical and professional-looking packaging for various liquid cosmetic products. Thanks to the plastic material used, the container is lightweight, resistant to normal handling, and also suitable for more viscous products that require controlled dosing. The transparent dispenser allows comfortable and hygienic application of the contents, which increases user comfort during everyday use.
This bottle is an independent packaging component and is compatible with various types of closures and dosing systems according to the parameters selected for the product. It can be combined, for example, with screw caps, droppers, spray heads or practical applicators, always depending on the specific neck and the recommendations given for the particular packaging.
Packaging and closure combinations that are created directly on Handymade are tested and functional. However, for all combinations we always recommend carrying out your own compatibility test (sealing, dosing and behaviour of the packaging in contact with the specific formulation), so that you can be sure of long-term reliable use.
All technical parameters of the packaging are given in the attached Packaging Quality Certificate and in the product parameters.
The bottle with dispenser is designed to handle common liquid and slightly viscous cosmetic formulations such as light creams, emulsions, gels or lotions. For extremely thick products (for example very rich balms) we recommend first carrying out a trial filling and testing the dosing in order to verify the smooth operation of the pump and the uniformity of product delivery.
The packaging can be reused if hygienic principles are observed, for example when refilling the same type of product. Before each new filling, the bottle and the dispenser must be thoroughly cleaned and subsequently disinfected with a suitable alcohol-based preparation, for example IPA 99% isopropyl alcohol or ethanol 96% denatured, plant-based. This reduces the risk of microbial contamination, increases the safety of use and extends the service life of the packaging.
When filling the packaging, it is advisable to use a funnel or a filling syringe in order to minimize contamination of the neck and the area around the thread. Do not fill the bottle completely to the top – leave a small expansion gap, which will make it easier to attach the dispenser and prevent the product from being forced out when screwing it on. After filling, tighten the closure firmly and before first use, press the pump several times so that the system is primed and even suction of the product takes place.
If you decide not to reuse the packaging, we recommend, after emptying and basic rinsing, sorting it into separated waste according to the type of material indicated in the product parameters. Before disposal, it is advisable to remove any product residues from the bottle and dispenser and to separate any different material parts, if possible (for example by unscrewing the pump from the body of the bottle). Then place the packaging into the appropriate collection container according to local waste sorting rules so that it can be recycled and recovered again in the recycling process.
When selecting suitable packaging, you can use the extended filter located at the top of the page after clicking on the relevant packaging category. With its help, products can be quickly filtered according to neck type, size, colour and material, which significantly speeds up and refines the selection. We recommend first clarifying the consistency and method of use of your product and then transferring these requirements into the filter so that you can find the optimal bottle, pharma bottle or jar for your specific project.
