COSMETIC CLAYS
French Red Cosmetic Clay 100 g
Red French cosmetic clay binds excess sebum and impurities from skin and hair, and at the same time gives products a natural reddish-brown colour. full description
Lowest price in the last 30 days: €2.42
Product description
Red French cosmetic clay binds excess sebum and impurities from skin and hair, and at the same time gives products a natural reddish-brown colour. It is used mainly in face and body masks, cleansing products and soaps for oily and problem skin. It works both as the base of a clay mask and, in a small amount, as a natural dye.
It is a blend of two clay minerals, illite (approximately 75%) and kaolin (approximately 25%), and it naturally also contains a share of non-clay minerals. It comes from France and is processed only mechanically, by drying and grinding, without any chemical processes.
How it works on skin and hair
Clay works on the surface of the skin. Its tiny particles bind sebum, impurities and odours, which are then rinsed off along with it. Illite is one of the clays with higher absorbency, while kaolin is among the milder ones. Combined, they are suitable for oily, problem and acne-prone skin.
Besides cleansing, clay also has an astringent effect. It slightly tightens the skin, and pores look less prominent after use.
It also works mechanically when rinsed off. Finely ground particles help loosen dead skin cells, which is a gentle form of exfoliation.
In hair care, clay is used for hair prone to oiliness and for the scalp, where it likewise binds excess sebum.
Functions in a formulation
- Sebum and odour absorbent – binds sebum and odours; it is useful in masks, cleansing products and products for greasy hair.
- Natural dye – the clay gets its reddish-brown shade from its naturally high iron content. It colours a product even at a low usage rate.
- Opacifier – turns a clear base into an opaque one.
- Abrasive ingredient – 90% of the particles are smaller than 45 µm, so the clay works as a gentle scrub.
Use in a formulation
Clay dissolves neither in water nor in oil; it disperses in both. It is incorporated into the water phase or added afterwards to the finished product. In some recipes it is also added straight into the initial phase together with glycerine, or with vegetable butters and oils. It is odourless and does not affect the fragrance of the product.
The usage rate covers a wide range: 5–100%. The upper limit means a pure clay mask, while around 10% is used as the base of a product. When the clay is only meant to colour a product or bind sebum, much less is enough: around 0.3% in a conditioner or 0.6% in a facial cleansing gel bar.
Its pH has to be taken into account. The clay is mildly alkaline, with a pH of 8–9, and it raises the pH of the product.
In products with an acidic pH, take the clay into account when making the final pH adjustment. In recipes it is combined, for example, with lactic acid.
Suitable for products such as
- face and body masks, both powdered and ready-made
- facial cleansing products, including solid cleansing bars
- soaps, where it serves as a natural dye and a gentle abrasive ingredient
- conditioners and other products for hair prone to oiliness, and for the scalp
- decorative cosmetics that make use of its colour and its ability to bind sebum
It can be used in both rinse-off and leave-on products.
Good to know
Clay is a natural mineral and is not sterile. In standard quality it contains fewer than 1 000 CFU/g of microorganisms, and the monitored pathogens are not present.
Every clay product that contains water needs a preservative and hygienic production. Clay does not replace preservation.
As a mineral, it is not biodegradable. It is approved for natural cosmetics under the COSMOS standard (COSMOS Approved). We recommend checking the pH, the stability and the final shade of the finished product on a trial batch.
Frequently asked questions
Parameters
- INCI
- Illite, Kaolin
- CAS No.
- 12173-60-3, 1332-58-7
- EC number
- 601-803-4, 310-194-1
- Country of origin
- France
- Grade
- Cosmetic grade
- Appearance
- Powder
- Formulation phase
- Water phasePost-addition
- Recommended usage rate
- 5 – 100 %
- Function in formulation
- ColorantOpacifierOdour absorptionAbrasive agent
- Biodegradability
- Non-biodegradable
- Manufacturer's certificate
- COSMOS Approved
- Natural Index (NI ISO 16128)
- 1,00
- Natural Origin Index (NOI ISO 16128)
- 1,00
Product documentation
- TDSTechnical Data Sheet
- PDF ↓
- SDSSafety Data Sheet
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





















