+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

ACTIVE INGREDIENTS

GDL, Glucono-Delta-Lactone, 100 g

Pack size50 g100 g1 kg5 kg

GDL (Glucono delta-lactone) belongs to the group of polyhydroxy acids (PHAs) . On the skin it gradually loosens dead cells from the surface, binds water and acts as a mild chelating agent . full description

AvailabilityIn stock · 72 packs
Product codeAD002_100
BatchY0241901
Best before11/2027
€3.10incl. VAT€31.00/kg

Promotion Active Days until 18 Nov

with code ACTIVE10 €2.79 (−10 %)

All promotion items

Lowest price in the 30 days before the discount: €3.10

Product description

GDL (Glucono delta-lactone) belongs to the group of polyhydroxy acids (PHAs). On the skin it gradually loosens dead cells from the surface, binds water and acts as a mild chelating agent. It exfoliates gently, without penetrating deep into the skin, and is therefore also suitable for products for sensitive and dry skin. In a formulation it is simply weighed out and dissolved in the water phase.

It is produced biotechnologically, by fermenting glucose syrup from maize followed by crystallisation. The ingredient originates in the European Union and is readily biodegradable.


How GDL works

GDL itself is not an acid. Once dissolved in water, it gradually converts into gluconic acid, which belongs to the PHAs. The conversion is slow. The pH of the solution keeps falling for a long time after mixing and only settles once an equilibrium forms between the two forms. This behaviour determines how the ingredient is handled. A 1% solution on its own has a pH of around 3.6.

The difference from AHA acids lies in the size of the molecule. Gluconic acid is larger than glycolic acid, penetrates the skin less and acts mainly on the surface. The shedding of dead cells is more gradual and the skin is less irritated. The molecule also holds water, so in a formulation it serves as a moisturising agent too.


Key benefits

  • Gentle exfoliation – loosens dead cells on the skin surface without penetrating deep, also suitable for sensitive, dry and acne-prone skin.
  • Hydration – binds water and supports skin hydration during exfoliation.
  • Chelating effect – binds traces of metal ions in the product, although more weakly than specialised chelating agents.
  • Hair and scalp conditioning – in shampoos and scalp scrubs it helps to loosen dead cells and impurities.

Use in formulations

GDL dissolves in water very well, at approximately 590 g/l, and only partially in alcohol. It is added to the water phase or afterwards to the finished product, always at a temperature below 40 °C. It is most often weighed out together with the other powders and dissolved directly in water or hydrosol.

The recommended usage rate is 1–10%. In toners, mists and cleansing products it appears in lower amounts, and in a scalp scrub around 5%, where it complements physical abrasives. The target pH of the formulation is 3.0–4.5. Above a pH of around 4.5 the ingredient remains in the product, but the exfoliating effect weakens.

Measure the pH of the product only after it has settled, not immediately after mixing. In water GDL converts into gluconic acid gradually, and the finished product would otherwise become more acidic later than the level you set.

Because the pH changes gradually, we recommend including a buffering ingredient that keeps the pH stable. Unstable pH can compromise the stability of the product and the efficacy of the preservative. Sodium Lactate, for example, is used in formulations as a buffering partner. With sodium phytate (Sodium Phytate), GDL forms a buffer that is then fine-tuned only with sodium hydroxide.

In cleansing products, check the pH after all ingredients have been mixed. Glucoside surfactants raise the pH, GDL lowers it, and the final value depends on their ratio. In a scrub with betaine and isethionate surfactants, the target is set at pH 4.5–5.0, taking both GDL and the preservative into account.


Suitable for products such as

  • Toners and facial mists – light daily exfoliation, also for sensitive skin.
  • PHA serums and creams – leave-on products in which the shedding of dead cells is combined with hydration.
  • Cleansing milks and gels – in rinse-off products it complements surfactants and helps to set an acidic pH.
  • Scalp scrubs and shampoos – chemical exfoliation that complements physical abrasives.
  • Shower and bath products – a conditioning ingredient for the skin of the body and hands.
  • Soaps – an active and chelating ingredient.

Good to know

GDL is often combined with trehalose, betaine, allantoin, panthenol, glycerine and tocopherol. The result is often products in which exfoliation is accompanied by soothing and hydration of the skin.

The ingredient is not a preservative itself. It lowers the pH of the product and acts synergistically in natural preservative blends with sodium benzoate. However, a water-based product containing GDL needs its own preservative system that works at acidic pH.

Avoid strong heating, which causes GDL to decompose, and contact with oxidising agents. In emulsions it is added only after they have cooled below 40 °C.

GDL is not classified as hazardous under the CLP Regulation. It contains no known skin or fragrance allergens, nanomaterials or ingredients of animal origin. It complies with Regulation (EC) No 1223/2009 on cosmetic products.


Frequently asked questions

Is GDL soluble in water?
Yes, GDL (Glucono delta-lactone) dissolves in water very well, at approximately 590 g/l. It is only partially soluble in alcohol. It is added to the water phase, where it dissolves together with the other powders, or it is worked into the finished product afterwards at a temperature below 40 °C.
What pH should a product with GDL have?
The recommended pH range for a formulation with GDL is 3.0–4.5. Within this range the ingredient retains its exfoliating effect. Above a pH of around 4.5 it remains in the product, but the shedding of dead cells weakens. Measure the pH only after it has settled, because it keeps falling for a long time after mixing.
Why does the pH of a product with GDL fall over time?
In water GDL gradually converts into gluconic acid, and the pH of the solution falls until an equilibrium forms between the two forms. The change in pH can affect the stability of the product and the preservative. We therefore recommend including a buffering ingredient, for example Sodium Lactate, and checking the pH after it has settled.
Can GDL be added to a cream while hot?
No, GDL is added only after the emulsion has cooled below 40 °C, or directly to the cold water phase. Strong heating leads to decomposition of the ingredient. The recommended processing temperature is below 40 °C, so it is worked into finished emulsions afterwards.
What is the difference between GDL and AHA acids?
GDL is a source of polyhydroxy acid (PHA) with a larger molecule than AHA acids, for example glycolic acid. It penetrates the skin less and acts mainly on the surface, where it gradually loosens dead cells. It is therefore less irritating to the skin and is also suitable for sensitive and dry skin. At the same time it binds water and supports hydration.
Is GDL a preservative?
No, GDL itself is not a preservative, and a water-based product containing it needs its own preservative system. However, GDL lowers the pH and acts synergistically in natural preservative blends with sodium benzoate, thereby supporting their efficacy. Choose a preservative that works at an acidic pH of 3.0–4.5.

Parameters

INCI
Gluconolactone
CAS No.
90-80-2
EC number
202-016-5
Product colour
White
Country of origin
European Union
Appearance
Powder
Formulation phase
Water phasePost-addition
Application area
FaceHairScalpBodyHands
Recommended processing temperature
< 40 °C
Recommended usage rate
1 – 10 %
Recommended formulation pH range
3,0 – 4,5
Application type
Leave-onRinse-off
Biodegradability
Readily biodegradable
Manufacturer's certificate
ISO 9001
Natural Index (NI ISO 16128)
1,00
Natural Origin Index (NOI ISO 16128)
1,00

Product documentation

CoACertificate of Analysis
batch Y0241901PDF ↓
TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

2 PDF files in one archive

Learn how to work with it

From our blog
Francoise B.16 Nov 2026FR

Verified purchase

Good, a very good product, but complicated to formulate so that it stays active without pH drift.

Translated automatically

Silvia R.13 Nov 2026ES

Verified purchase