+421 950 333 113info@handymade.store−10 %Shop now

Candle waxes

Paraffin Wax, Kerawax 485, 25 kg

Pack size1 kg5 kg25 kg

Kerawax 485 paraffin wax is a fully refined paraffin of mineral origin intended for candle making. It forms the base of the candle, which is melted, infused with fragrance and poured into a jar or mould. full description

AvailabilityPre-order
Product codeSV070_25
€193.50incl. VAT€7.74/kg

Lowest price in the last 30 days: €193.50

Pre-orderThis variant is currently out of stock — your order will be a pre-order and delivery may take longer.

Product description

Kerawax 485 paraffin wax is a fully refined paraffin of mineral origin intended for candle making. It forms the base of the candle, which is melted, infused with fragrance and poured into a jar or mould. It is compatible with fragrance, so it is also suitable for scented candles.

The high degree of refinement gives the wax a pure white colour that does not distort the shade of any added dye. Without dye, the candle stays white.


Key properties

  • Solidification point 56–58 °C – the typical value is around 57 °C.
  • Penetration 10–20 dmm at 25 °C – a hardness test value; the wax is hard at room temperature and holds its shape.
  • Low viscosity of the melted wax – at 100 °C it is between 3.5 and 4.5 cSt, so the melted wax is fluid, mixes well with fragrance oil and pours easily.
  • Pure white colour – Saybolt colour of at least 25, typically 28, which corresponds to a high degree of refinement.
  • Free of animal-derived ingredients and GMOs – no raw materials of animal origin or components from genetically modified organisms are used in production, and the wax has not been tested on animals.

Processing and candle making

The wax is melted indirectly, most often in a water bath. The recommended processing temperature is 80–85 °C. At this temperature the mass is fluid enough to mix in the dye and fragrance oil thoroughly. The fragrance oil is added to the melted wax while stirring continuously, and the amount follows the recommendation for the given fragrance oil.

After mixing, the wax is poured into prepared containers with a sustainer-mounted wick already in place, or into moulds. For container candles and tealights, the wick is centred and fixed so that it does not shift as the wax sets. The candles are left to set at room temperature, away from draughts and sudden temperature changes.

Before producing a larger batch, we recommend pouring a test candle with the planned fragrance oil and wick. The behaviour of the flame, the size of the melt pool and the intensity of the fragrance can only be assessed on a finished candle.


Good to know

The wax is soluble in oils and insoluble in water. Melting it in a water bath therefore does not harm it, but water must not get into the wax itself.

The substance is not classified as hazardous under the CLP Regulation and its flash point is above 150 °C. At high temperatures, however, it can be flammable, so the melted wax must not be overheated above the recommended temperature or left unattended.

A thermometer is part of the basic equipment. The temperature is measured directly in the wax, and the fragrance oil is added only once the working temperature has been reached.


Frequently asked questions

What is the melting point of Kerawax 485?
The solidification point of Kerawax 485 paraffin wax is 56–58 °C, typically around 57 °C. The wax is solid at room temperature, and the hardness test gives a penetration of 10–20 dmm at 25 °C. Once melted, it has a low viscosity, 3.5–4.5 cSt at 100 °C, and pours well into containers and moulds.
Is Kerawax 485 paraffin wax suitable for scented candles?
Yes, the wax is compatible with fragrance and is suitable for making scented candles. The fragrance oil is added to the melted wax only once it has reached the working temperature, stirring constantly. The amount of fragrance oil follows the recommendation for the specific fragrance, and the result is checked with a test candle.
At what temperature is Kerawax 485 processed?
The recommended processing temperature for Kerawax 485 paraffin wax is 80–85 °C. The wax is melted indirectly, ideally in a water bath, with a thermometer placed directly in the wax. Higher temperatures are not necessary and increase the risk of overheating the melted wax.
Does Kerawax 485 contain animal-derived ingredients?
No, Kerawax 485 paraffin wax contains no materials of animal origin and does not come into contact with them at any stage of production, so BSE/TSE contamination is also ruled out. It has not been tested on animals and was not produced using genetically modified organisms. The raw material is of mineral origin.
Does Kerawax 485 require a safety data sheet?
No, Kerawax 485 paraffin wax is not classified as hazardous under Regulation (EC) No 1272/2008, so a safety data sheet is not required for it under Article 31 of the REACH Regulation. The product is not classified as carcinogenic, mutagenic or toxic to reproduction, and it contains no residual solvents of class 1, 2 or 3 according to ICH Q3C.

Parameters

CAS No.
8002-74-2
EC number
232-315-6
Product colour
White
Chemical name
Paraffin wax
Country of origin
United Kingdom
Appearance
Wax
Recommended processing temperature
80 – 85 °C
Biodegradability
Inherently biodegradable

Product documentation

TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

1 PDF file in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.