PLASTIC BOTTLES
Clear Plastic Bottle, White Disc Top, 150 ml
Pack size100 ml150 ml200 ml250 ml500 ml
A clear PET bottle with a capacity of 150 ml and a white disc top cap makes a ready-to-use set for filling with liquid and semi-liquid cosmetic products. full description
Lowest price in the last 30 days: €0.79
Total for 1 pcs: €0.79
Quantities add up across all combinations of this bottle.
Product description
A clear PET bottle with a capacity of 150 ml and a white disc top cap makes a ready-to-use set for filling with liquid and semi-liquid cosmetic products. The product is dispensed by pressing the disc, without unscrewing the cap, which is especially useful for bathroom products where quick and clean dispensing matters.
The clear material shows the colour of the contents and how much product is left. PET is lightweight, so it suits shower gels, shampoos and body lotions that are used on wet surfaces or taken on trips. The bottle and the cap share a 24/410 neck finish and are together declared suitable for contact with cosmetic products.
How the disc top cap works
A disc top has a round disc in its upper part. Pressing one side tilts the disc and uncovers a small dispensing opening, and pressing the opposite side closes the opening again. The cap stays screwed onto the bottle permanently, and the product is dispensed simply by tilting or lightly squeezing the bottle. The opening is narrow, so products of liquid to medium-thick consistency pass through it best. Very thick creams or butters are difficult to push through a disc top, and thin, watery liquids may flow out faster than you would like.
What the set is suitable for
- Shower gels and liquid soaps – dispensing with a single finger directly in the shower, without an unscrewed cap that could get lost or wet.
- Shampoos and conditioners – a medium-thick consistency passes through the opening smoothly and the dose is easy to judge.
- Body and face lotions – light O/W emulsions flow smoothly from the disc top, thicker creams less so.
- Massage and body oils – the clear bottle shows the colour of the oil and the amount that is left.
- Cleansing gels – anywhere the product is applied to the palm or a cotton pad.
A capacity of 150 ml matches the usual size of a shower gel or body lotion and is also suitable as a trial batch when testing a new formulation.
Capacity and filling
The nominal capacity is the volume the bottle is designed for under normal filling. The total brimful capacity given in the parameters is the physical volume up to the neck. The difference between them is a reserve for the cap and for the expansion of the contents when the temperature changes, so the bottle is filled to the nominal capacity, not to the brim. If it were filled up to the neck, part of the product would get into the thread and the disc top could leak at the first press.
Fill thicker products using a funnel or a dispensing bottle with a narrow neck. Leave the filled bottle to stand for a moment so that air bubbles rise to the neck, and only then screw on the cap.
Good to know
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the disc top or in the thread is an unnecessary risk with a preserved formulation and can spoil an anhydrous formulation.
PET is filled cold. A hot emulsion or liquid soap poured straight from the pot can deform the bottle, so let the product cool to room temperature first. For formulations with a high proportion of essential oils, alcohol or solvents, check how the plastic behaves with the specific formulation over several weeks before producing a larger batch. The packaging must not be exposed to aggressive chemicals.
The set is intended for cosmetics. It is not declared for contact with food, so it is not suitable for homemade syrups, cooking oils or herbal infusions for drinking.
Clear PET does not protect the contents from light. Store products with essential oils, plant extracts or oils prone to oxidation away from direct sunlight, or choose dark packaging for them.
After washing and disinfection, the bottle and the cap can be reused. With longer use, check the thread and the disc of the cap, as a worn disc stops sealing properly. If the disc top does not suit you, you will find closures with the same neck type and other ready-made combinations of bottle and closure in the Handymade range. If you make your own combination, check the tightness and dispensing with the specific formulation. The PET bottle and the PP cap belong in sorted plastic waste, and it is enough to separate them and rinse them before disposal.
Frequently asked questions
Parameters
Plastic bottle, clear 24/410, 150 ml
Plastic cap, 24/410, disc top, white
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.































































