Plastic bottle, white, black mini trigger sprayer, 250 ml

The white PET bottle with a black mini trigger sprayer is a ready-made packaging solution for water-based and thin cosmetic products applied as a fine mist: toners, hydrosols, refreshing face and body sprays, hair sprays, leave-in conditioners and thin herbal infusions. The plastic is lightweight and unbreakable, which you will appreciate with sprays that are carried in a bag or kept in the bathroom. The 250 ml volume is enough for a larger pack of toner or body spray, both for making products to sell and for your own use.

The set consists of two components with a 24/410 neck finish: a bottle and a mini trigger sprayer with a smooth collar. You screw the sprayer directly onto the thread of the bottle and the packaging is ready to fill.

What the set offers

• Fine mist spraying – the mini trigger sprayer distributes the contents evenly onto the skin or hair, without dripping and without touching the product by hand.
• Dose of approximately 0.2 ml – one press releases a small, repeatable amount, which you can rely on when writing usage instructions for your customers.
• Unbreakable and lightweight – the plastic withstands drops and transport better than glass and does not increase postage costs.
• Black and white combination – a neutral look suitable for both skin care and hair care cosmetics.

What the set is suitable for

The sprayer is designed for contents with a water-like consistency or only slightly thicker. Suitable products include facial toners, hydrosols, micellar water sprays, refreshing and cooling sprays, hair sprays with moisturising ingredients, detangling products, alcohol-based hand disinfectant sprays, and fabric and room fragrances in a water-alcohol base.

Oils, thick serums, emulsions and gels are difficult to apply with a mini trigger sprayer. They produce an uneven mist, and the nozzle may leak or become clogged. For these products, choose a bottle with a pump or a cap from the Handymade range instead.

Nominal and total volume

The nominal volume is the amount the bottle is designed to hold when filled normally. The bottle has somewhat more space up to the neck, but this reserve is taken up by the dip tube and the body of the sprayer. For this reason, fill it to the nominal volume, not to the brim. If you overfill it, the contents are pushed out through the neck when the sprayer is screwed on and soil the thread.

Good to know

The set is declared as suitable for contact with cosmetics, and the declaration of conformity is available with the product. Only the bottle has a separate certificate for direct contact with food. The sprayer does not have one, so use the set as a whole for cosmetic products, not for food purposes.

Before first filling, wash and rinse the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Pump the sprayer several times with clean water and let it dry with the dip tube pointing downwards. Repeat the same procedure each time you reuse the packaging, otherwise residues of the previous contents will affect the stability of the new product.

Do not expose the bottle to aggressive chemicals. For formulations with a higher proportion of essential oils, solvents or strong fragrance compositions, we recommend letting the filled packaging stand for several weeks and monitoring the wall of the bottle, the tightness of the thread and the function of the sprayer.

You will find closures with the same neck type and other ready-made combinations of a bottle with a pump or a cap in the Handymade range. When putting together your own combination, check the tightness, dispensing and behaviour of the packaging with your specific formulation.

The bottle is made of PET and the sprayer of PP. Before handing them over for recycling, separate the two parts so that they end up in the correct material stream.

Frequently asked questions