The bottle can be used repeatedly if hygienic principles are observed and after assessing its suitability for the specific type of contents. Before each new filling, the packaging must be thoroughly cleaned mechanically and then disinfected with a suitable alcohol-based preparation, for example isopropyl alcohol or ethanol. For disinfection you can use the products IPA 99% isopropyl alcohol or Ethanol 96% denatured plant-based. After disinfection, allow the inner walls and the cap to dry completely to avoid dilution or alteration of your formulation.

We recommend first rinsing the bottle with a suitable cleaning solution or with warm water and a gentle detergent that is compatible with your previous contents. After thorough rinsing, the packaging must be disinfected with alcohol. In practice, for example, IPA 99% isopropyl alcohol or Ethanol 96% denatured plant-based have proven effective. After applying the alcohol, allow the bottle and the cap to drain and dry completely at room temperature. Avoid using aggressive solvents that could damage the plastic or the sealing elements of the closure.

If you decide not to reuse the packaging, we recommend placing it in sorted waste according to the type of plastic specified in the product parameters. Before handing it over for collection, it is advisable to rinse the bottle and remove any product residues so as not to complicate the recycling process. According to the material marking on the packaging or in the parameter table on the product page, assign it to the appropriate plastic fraction (for example together with packaging of the same type in the yellow container). If the closure is made of a different material, it is ideal to separate it and recycle it according to its marking. By following the recommended sorting method, you support more efficient processing of plastic waste.

The plastic packaging is intended primarily for use at normal room temperatures and standard storage. In general, for plastic packaging of this type we do not recommend exposure to high temperatures, such as boiling, use of hot steam or washing in a dishwasher. Under excessive thermal stress there is a risk of shape deformation, impairment of the closure sealing or reduction of mechanical stability. For cleaning and disinfection, it is therefore more appropriate to use lukewarm water followed by alcohol-based disinfectants that do not require heat treatment.

To choose a suitable packaging, you can use the advanced filter in the packaging category. After clicking on the selected category (for example bottles, jars or pots), you will find the filter in the upper part of the page. With its help you can easily narrow down the offer according to parameters such as neck type, size, colour and material. In this way you will quickly find a bottle, vial or jar that will best correspond to your formulation, dosing method and the visual style of your brand.