+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

EMULGATORS

Polyglyceryl-10 Stearate, 100 g

Pack size50 g100 g500 g1 kg5 kg

Polyglyceryl-10 Stearate is a non-ionic emulsifier of vegetable origin that combines the oil phase and the water phase into an oil-in-water (O/W) emulsion . It is used to make light creams, milks and fluids. full description

AvailabilityIn stock · 206 packs
Product codeEM023_100
Batch20231125
Best before01/2028
€6.39incl. VAT€63.90/kg

Lowest price in the last 30 days: €5.69

Product description

Polyglyceryl-10 Stearate is a non-ionic emulsifier of vegetable origin that combines the oil phase and the water phase into an oil-in-water (O/W) emulsion. It is used to make light creams, milks and fluids. It is produced without ethylene oxide, so it is suitable where a formulation should not contain ethoxylated emulsifiers. It is COSMOS and NATRUE approved.


How it works in an emulsion

Polyglyceryl-10 Stearate is an ester of polyglycerol and stearic acid. The polyglycerol part of the molecule binds to water and the fatty acid binds to oil. The emulsifier settles at the interface between the two phases and keeps the oil droplets dispersed in the water. An HLB value of 11–12 places it among the emulsifiers for O/W emulsions.

Besides emulsifying, it also affects how the product flows. In combination with consistency factors and gums, it produces a stable fluid that thins out when spread.

The molecule carries no charge. It is compatible with anionic, cationic, amphoteric and non-ionic surfactants, with electrolytes, alcohol and fragrance. It can be combined with a wide range of emollients and with both synthetic and natural polymers.


Use in a formulation

The emulsifier is added to the oil phase or directly during emulsification. It is processed hot, at a temperature below 80 °C.

The usage rate is 1–5%.

In the manufacturer’s sample formulation of a facial fluid, approximately 2% of the emulsifier was sufficient, supplemented with consistency factors and gelling agents.

In a formulation it works in a pH range of 3–12. It can be used in acidic preparations, in neutral creams and in alkaline products. The manufacturer’s sample emulsion had a pH of 5.

It is poorly soluble in water. Do not add it to cold water; it belongs in the oil phase.


Suitable for products such as

  • Facial fluids and milks – light O/W emulsions for the face, including the eye area.
  • Body milks and creams – keeps the emulsion stable in O/W creams and milks.
  • Baby cosmetics and products for sensitive skin – the emulsifier is suitable for all skin types.
  • Hair care – emulsions for hair and scalp, also in combination with cationic surfactants.
  • Shower and bath products, intimate hygiene – compatible with both anionic and amphoteric surfactants.
  • Decorative cosmetics – O/W emulsions.

Good to know

It does not create a thick emulsion on its own. The consistency comes from other ingredients: consistency factors Cetearyl Alcohol or Cetyl Palmitate in the oil phase, and gums, for example Xanthan Gum or alginate, in the water phase.

The raw material is yellow and comes from the coconut palm and the oil palm. It contains no preservatives or antioxidants, so the finished emulsion containing a water phase must be preserved separately.

It is readily biodegradable. It is suitable for both rinse-off and leave-on products. We recommend verifying the stability of the finished emulsion on a test batch.


Frequently asked questions

Is Polyglyceryl-10 Stearate soluble in water?
Polyglyceryl-10 Stearate is poorly soluble in water. It is added to the formulation in the oil phase or during emulsification and is processed at a temperature below 80 °C. It is not added to cold water. Cold processing has not been verified for this raw material, so plan on processing it hot.
What is the usage rate of Polyglyceryl-10 Stearate in a cream or milk?
Polyglyceryl-10 Stearate is used at 1–5% of the total weight of the product. In the manufacturer’s sample formulation of a facial fluid, approximately 2% was sufficient together with consistency factors and gelling agents. The amount needed depends on the proportion of the oil phase and on the other ingredients. Verify it on a test batch.
Does Polyglyceryl-10 Stearate create a thick cream without other ingredients?
No, Polyglyceryl-10 Stearate does not create a thick emulsion on its own. It binds the oil phase and the water phase together, but the consistency comes from consistency factors such as Cetearyl Alcohol or Cetyl Palmitate and from gums in the water phase, for example Xanthan Gum. With these, it produces a stable fluid or milk that thins out when spread.
Is Polyglyceryl-10 Stearate suitable for natural cosmetics?
Yes, Polyglyceryl-10 Stearate is COSMOS and NATRUE approved and can be used in certified natural cosmetic products. It is of vegetable origin and is obtained from the coconut palm and the oil palm. It is produced without ethylene oxide, contains no GMO ingredients and is readily biodegradable.
At what pH can Polyglyceryl-10 Stearate be used?
Polyglyceryl-10 Stearate is used in formulations with a pH of 3–12. It is suitable for acidic preparations, for neutral creams and milks, and for alkaline products. The manufacturer’s sample emulsion had a pH of 5. The emulsifier is also compatible with electrolytes, alcohol and fragrance.
Is Polyglyceryl-10 Stearate suitable for sensitive and baby skin?
Yes, Polyglyceryl-10 Stearate is also used in products for sensitive and baby skin. Under the CLP Regulation it is not classified as hazardous, and it contains no fragrance allergens or parabens. It can be used on the face, in the eye area, on the body, hands, hair and scalp.

Parameters

INCI
Polyglyceryl-10 Stearate
CAS No.
79777-30-3
Product colour
Yellow
Processing method
Chemical reaction
Appearance
Paste
Original best before date
31. 1. 2027
Function in formulation
SurfactantRheology modifier
HLB value
11 – 12
Ionic character
Non-ionic
Recommended processing temperature
< 80 °C
Recommended usage rate
1 – 5 %
Recommended formulation pH range
3 – 12
Application type
Leave-onRinse-off
Biodegradability
Readily biodegradable
Natural Index (NI ISO 16128)
0,00
Manufacturer's certificate
COSMOS ApprovedNATRUE Approved
Natural Origin Index (NOI ISO 16128)
1,00
Renewable Carbon Content (RCC)
100 %

Product documentation

TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

1 PDF file in one archive

Greta T.8 Nov 2026IT

Verified purchase