+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC BOTTLES

Rounded Clear Plastic Bottle, Transparent Plastic Pump, 200 ml

Pack size100 ml200 ml300 ml500 ml

A clear 200 ml PET bottle and a pump with a 24/410 neck finish make a ready-to-use set for liquid and medium-thick cosmetic products. full description

AvailabilityPre-order
Product codeO24PP200B-OVD24PP
€1.27incl. VAT

Lowest price in the last 30 days: €0.86

Pre-orderThis variant is currently out of stock — your order will be a pre-order and delivery may take longer.
Volume pricing
1–83 pcs€1.27Your price
84–1007 pcs€1.22−4 % · 1× plato
1008–5039 pcs€1.18−7 % · 12× plato
from 5040 pcs€1.13−11 % · 60× plato

Total for 1 pcs: €1.27

Quantities add up across all combinations of this bottle.

Add 83 more pcs and the price drops to €1.22/pc.

Product description

A clear 200 ml PET bottle and a pump with a 24/410 neck finish make a ready-to-use set for liquid and medium-thick cosmetic products. Pressing the pump dispenses a measured amount of the contents without unscrewing anything and without your hands touching the product in the bottle, which you will appreciate most with daily use in the bathroom. The clear wall shows both the colour and the remaining amount, the bottle is light and it does not break when dropped.

The set is declared as suitable for contact with cosmetics. It is not approved for contact with food, so use it only for cosmetic products.


What it is suitable for

  • Liquid soaps and shower gels – the pump always delivers approximately the same dose, so the product is not wasted and the bottle stays clean on the outside.
  • Shampoos and conditioners – the pump can be operated with one hand, which is an advantage in the shower compared with a flip top cap.
  • Body lotions and light creams – medium-thick emulsions pass through the pump tube without problems. Thicker creams slow down or stop the dispensing.
  • Cleansing milks and facial cleansing gels – a dose of around 1.4 ml corresponds to one application on the face.
  • Massage and body oils – the clear wall shows the colour of the oil. For oils with a high proportion of essential oils, we recommend checking how the plastic behaves with your specific formulation.

Nominal and total volume

The nominal volume is the amount the bottle is designed for in normal filling. The total brimful volume is the physical volume up to the neck. The difference between them is a reserve for the tube and the pump mechanism and for the expansion of the contents when the temperature changes. For this reason the bottle is filled up to the nominal volume, not to the brim. If it is overfilled, the contents are pushed out through the neck or run under the thread when the pump is screwed on.


Good to know

Before the first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Rinse the pump tube and let the water drain from it so that the first dose of the product is not diluted. After filling and screwing on the pump, press it several times to prime it until the tube fills and the pump starts to deliver the product.

The pump is intended for products without solid particles. Scrubs with grains, products with flakes, or very thick butters and creams will clog it or damage the valve.

Clear plastic does not provide protection from light. Store light-sensitive products, for example those with a high content of vegetable oils prone to oxidation, with vitamin C or with unstable plant dyes, in a dark place or choose a bottle made of a dark material. Fill the contents once they have cooled to room temperature; let emulsions and soaps cool before filling.

For formulations with a high proportion of essential oils, alcohol or other solvents, we recommend testing in a single bottle before filling a larger quantity. Some ingredients may over time cloud or soften the plastic or impair the tightness of the pump.

The set can be used repeatedly. Between two fillings, wash the bottle and the pump thoroughly, rinse the tube and let everything dry. Residues of the old product would otherwise contaminate the new filling, so always fill the same or a similar type of product. The bottle has a 24/410 neck finish, so other closures and sprayers with the same type of thread from the Handymade range also fit it. When you make your own combination, check the tightness and the dispensing with your specific formulation.

When you have finished using the packaging, empty it, rinse it and, before recycling, separate the PET bottle from the polypropylene pump, because they are two different plastics.


Frequently asked questions

Is the 200 ml plastic bottle with a pump suitable for liquid soap?
Yes, liquid soap is one of the most common uses of this set. The pump delivers one dose with a single press and can be operated with one hand, and a 200 ml bottle lasts several weeks with normal hand washing. Before filling, let the soap cool and settle so that the bubbles escape and the pump dispenses evenly.
Can a thick cream be dispensed through the pump?
A thick cream or body butter usually cannot be pushed through the pump. It is designed for liquid and medium-thick products, for example body lotions, gels, shampoos or oils. With thicker emulsions the tube fills slowly, the dose is often uneven and the valve may be damaged if the resistance is high. A jar or container is more suitable for thick creams.
Why is the 200 ml bottle not filled to the brim?
The bottle is filled up to the nominal volume of 200 ml because the remaining space up to the neck is a reserve for the pump tube and for the expansion of the contents when the temperature changes. If it were filled to the brim, the contents would be pushed out through the neck or run under the thread when the pump is screwed on, and the bottle would be sticky on the outside.
Does the clear PET bottle protect the contents from light?
No, clear plastic lets light through, so it does not protect the contents from it. For products with unstable active ingredients, oils prone to oxidation or natural dyes, a dark bottle or storage away from direct light is more suitable. The advantage of the clear wall is that you can see the colour of the product and how much of it is left.
How do I prepare the bottle and the pump before the first filling?
Wash the bottle and the pump with warm water, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Rinse the pump tube and let it drip dry so that no water remains inside, as it would dilute the first dose and could affect the preservation of the product. After filling, press the pump several times until it starts to dispense.

Parameters

Plastic bottle, clear round, 24/410, 200 ml, without cap

Product colour
Clear
Country of origin
India
Nominal capacity
200
Brimful capacity
220 ml
Diameter
51 mm
Thread type
24/410
Height
133 mm
Product material
PETPlastic

Transparent Plastic Pump, 24/410, FBOG 200 mm

Product colour
Clear
Country of origin
China
Diameter
53 mm
Thread type
24/410
Height
45 mm
Product material
PPPlastic
Tube length
200 mm
Dose
1,4 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, clear round, 24/410, 200 ml, without cap · O24PP200BPDF ↓
Transparent Plastic Pump, 24/410, FBOG 200 mm · OVD24PPPDF ↓
PDSProduct Data Sheet
Plastic bottle, clear round, 24/410, 200 ml, without cap · O24PP200BPDF ↓
Transparent Plastic Pump, 24/410, FBOG 200 mm · OVD24PPPDF ↓
DrawingTechnical drawing
Plastic bottle, clear round, 24/410, 200 ml, without cap · O24PP200BPDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.