+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

ALUMINUM BOTTLES

Aluminium bottle, clear pump, 50 ml

Pack size50 ml100 ml200 ml

This aluminium bottle with a clear pump for 50 ml of contents is used for filling liquid cosmetic products that are dispensed by pressing the pump: face and body lotions, lighter-textured serums, cleansing gels, face or… full description

AvailabilityPre-order
Product codeO24HS050-OVD24PP
€2.54incl. VAT

Lowest price in the last 30 days: €1.89

Pre-orderThis variant is currently out of stock — your order will be a pre-order and delivery may take longer.
Volume pricing
1–199 pcs€2.54Your price
200–999 pcs€2.39−6 %
1000–4999 pcs€2.26−11 %
from 5000 pcs€2.08−18 %

Total for 1 pcs: €2.54

Quantities add up across all combinations of this bottle.

Product description

This aluminium bottle with a clear pump for 50 ml of contents is used for filling liquid cosmetic products that are dispensed by pressing the pump: face and body lotions, lighter-textured serums, cleansing gels, face or body oils, or liquid soaps in travel size. The aluminium body is lightweight, unbreakable and blocks light completely, which helps with formulations containing light-sensitive ingredients. Both the bottle and the pump are declared as suitable for contact with cosmetic products.


What the set is suitable for

The small volume and durable material make this set well suited as packaging for travel and sample sizes to carry in a cosmetic bag, sports bag or handbag, where glass would be heavy and could break. The pump dispenses the same amount without opening the packaging, so the contents come into less contact with air and fingers than with a jar. The silver bottle is unprinted and can be left in its plain metal finish.

  • Light protection – aluminium does not let light through, so the packaging is suitable for oils, serums and emulsions with active ingredients that are harmed by light.
  • Pump dispensing – one press releases approximately 1.4 ml, which corresponds to one dose of face lotion or serum.
  • Clear pump – through the head and tube you can see whether the system is filled and whether the contents rise during dispensing.
  • Low weight – the bottle and the pump are light, so the set will not weigh down your luggage or handbag.

Filling and handling the pump

The pump is supplied with a long tube, which you adjust to the height of the bottle before first use. On the first press, the tube and head are filled first, and the contents come out only after several presses.

Shorten the tube so that, once the pump is screwed on, it reaches just to the bottom and does not bend. A bent or too short tube will not draw the contents all the way to the end.

The nominal volume of 50 ml is the volume the bottle is designed for in normal filling. The total brimful volume is the physical volume up to the neck. The difference between them is a reserve for the tube and the pump body and for the expansion of the contents with temperature changes.

Fill the bottle only up to the nominal volume. If it is filled to the brim, the contents will overflow through the thread once the pump is screwed on, and the set will not seal.

The pump is designed for liquid to medium-thick formulations. Thick creams, gels with high viscosity or products with solid particles (scrubs) may block the tube or be impossible to pump. For such recipes, we recommend testing the dispensing beforehand.


Good to know

Before first filling, wash and disinfect the bottle and the pump and let them dry completely. Residual water in the tube would dilute the first doses. Repeat the same procedure before each further filling, taking the pump apart and rinsing the tube and head as well.

For water-based, acidic or alkaline formulations, we recommend verifying the compatibility of the contents with the packaging by a stability test in your specific recipe. Oil-based and anhydrous formulations are less demanding in this respect, but we recommend a stability test for every new combination of packaging and recipe.

Other closures with the same type of thread can also be used on a bottle with a 24/410 neck finish. You will find them in the Handymade range, together with ready-made combinations of packaging and closure. For your own combination, we recommend verifying the tightness, the dispensing and the behaviour of the packaging with your specific formulation.

After you finish using it, take the set apart and sort it by material: the aluminium bottle as metal, the polypropylene pump as plastic.


Frequently asked questions

Does the aluminium bottle with a pump protect the contents from light?
Yes, the aluminium bottle does not let any light through. It is therefore suitable for oils, serums and emulsions with active ingredients that are harmed by light. Only the pump is clear. Its tube and head always hold only a small amount of the contents, and most of the contents remain in the light-blocking aluminium body.
To what level should the 50 ml aluminium bottle with a pump be filled?
Fill it only up to the nominal volume of 50 ml, not up to the brim of the neck. The total brimful volume is larger. This difference is a reserve for the tube and the pump body and for the expansion of the contents with temperature changes. If you overfill the bottle, the contents will leak through the thread once the pump is screwed on, and the closure will not seal.
Can the aluminium bottle with a pump be washed and reused?
Yes, both the bottle and the pump can be reused. Take the pump apart, wash all the parts and the bottle with warm water and a cleaning product, rinse, disinfect and let everything dry completely. A dry tube and head are especially important, because moisture in them would dilute the first doses of the new fill.
Is the aluminium bottle with a pump suitable for both water-based and oil-based formulations?
The pump can handle liquid water-based and oil-based formulations, but with water-based ones you need to verify how the contents behave in the aluminium bottle. Oil-based and anhydrous products are undemanding in this respect. For water-based formulations, especially acidic or alkaline ones, we recommend carrying out a stability test in your specific recipe before filling a larger quantity, and monitoring both the contents and the packaging.
How thick a product can the clear pump on the aluminium bottle handle?
The pump is designed for liquid to medium-thick formulations: face and body lotions, serums, oils, cleansing gels or liquid soaps. Thick creams, very viscous gels and products with scrub particles are difficult to pump or will block the tube. For borderline consistencies, we recommend filling a trial bottle and verifying the dispensing before you fill the whole batch.
Can a closure other than the pump be used on the 50 ml aluminium bottle?
Yes, the bottle has a 24/410 neck finish and can be closed with any closure of the same neck finish. You will find suitable closures and ready-made combinations of packaging and closure in the Handymade range. For your own combination, we recommend verifying the tightness and the behaviour of the closure with your specific formulation before filling a larger quantity.

Parameters

Aluminium bottle, 24/410, 50 ml

Product colour
Silver
Country of origin
China
Nominal capacity
50
Brimful capacity
65,5 ml
Diameter
36 mm
Thread type
24/410
Height
83 mm
Product material
Aluminium

Transparent Plastic Pump, 24/410, FBOG 200 mm

Product colour
Clear
Country of origin
China
Diameter
53 mm
Thread type
24/410
Height
45 mm
Product material
PPPlastic
Tube length
200 mm
Dose
1,4 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Aluminium bottle, 24/410, 50 ml · O24HS050PDF ↓
Transparent Plastic Pump, 24/410, FBOG 200 mm · OVD24PPPDF ↓
PDSProduct Data Sheet
Aluminium bottle, 24/410, 50 ml · O24HS050PDF ↓
Transparent Plastic Pump, 24/410, FBOG 200 mm · OVD24PPPDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.