ALUMINUM BOTTLES
Aluminium bottle, clear pump, 200 ml
The aluminium bottle with a clear pump is a ready-made set for liquid and creamy cosmetic products that are dispensed by pressing the pump: liquid soaps, shower gels, shampoos, body and face lotions or massage oils. full description
Lowest price in the last 30 days: €2.59
Total for 1 pcs: €3.28
Quantities add up across all combinations of this bottle.
Product description
The aluminium bottle with a clear pump is a ready-made set for liquid and creamy cosmetic products that are dispensed by pressing the pump: liquid soaps, shower gels, shampoos, body and face lotions or massage oils. The nominal volume of 200 ml corresponds to a common size for a bathroom product, for a beautician’s work table and for the range of a small brand. Aluminium does not let light through, so it protects contents containing vegetable oils, essential oils or active ingredients sensitive to light. The bottle is light and does not break when dropped. Both the bottle and the pump are declared as suitable for contact with cosmetic products; the set is intended for cosmetics, not for food. You will find the declarations of conformity for both components on the product page.
How the set works
The pump screws onto the bottle neck with a 24/410 neck finish and draws the product up through a dip tube. One press of the pump head dispenses approximately 1.4 ml, which corresponds to one hand wash with liquid soap or one dose of lotion. The clear polypropylene allows you to check whether the tube is filled and whether product residues are building up in the pump head.
The pump handles liquid to creamy consistencies. Thick creams, butters and products with larger particles (scrubs, seed grains) cannot be dispensed with it; for such formulations we recommend a jar or container. For gel products with higher viscosity, test the dispensing on one bottle before you fill the whole batch.
Filling and volume
The nominal volume is the volume the bottle is designed for under normal filling. The brimful capacity given in the parameters is the physical volume up to the neck. The difference between them is a reserve for the dip tube with the pump head and for the expansion of the contents when the temperature changes. The bottle is filled to the nominal volume, not to the brim. An overfilled bottle overflows when the pump is screwed on and the product remains on the thread.
After screwing on the pump, prime it by pressing the head several times until the tube and the head fill with the product. The first dose then comes out in full and the customer does not have to press the pump unnecessarily.
Good to know
- Preparation before first filling – wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Pump alcohol through the pump and then clean water, so that no residues remain in the tube.
- Testing with your formulation – for water-based and acidic formulations, fill one bottle first and monitor the contents, the inside of the bottle and the tightness of the joint between the neck and the pump for several weeks.
- The level is not visible – aluminium is opaque. The remaining contents are estimated from the weight of the bottle or from the dose starting to weaken.
- Reuse – after thorough washing and disinfection, the bottle can be filled again. If product that cannot be washed out has dried in the pump, replace it with a new one.
- Other closures – other closures with a 24/410 neck finish from the Handymade range also fit the bottle. For your own combination, check the tightness, the dispensing and the behaviour of the packaging with the specific product.
- Recycling – the aluminium bottle belongs with metals, the polypropylene pump with plastics. Separate both parts before disposal.
Store the pump in a dry and clean environment and, before screwing it on, check that there is no dust in the tube or under the head. Impurities would get directly into the product on the first press.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 200 ml
Transparent Plastic Pump, 24/410, FBOG 200 mm
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
















































