PLASTIC BOTTLES
Rounded Clear Plastic Bottle, Transparent Plastic Pump, 500 ml
Pack size100 ml200 ml300 ml500 ml
A clear 500 ml PET bottle with a pump for a 24/410 neck finish makes a ready-to-use set for liquid and semi-liquid cosmetic products that are dispensed by pressing the pump. full description
Lowest price in the last 30 days: €0.89
Total for 1 pcs: €1.27
Quantities add up across all combinations of this bottle.
Product description
A clear 500 ml PET bottle with a pump for a 24/410 neck finish makes a ready-to-use set for liquid and semi-liquid cosmetic products that are dispensed by pressing the pump. It suits products that are meant to stand by the sink or in the shower and be dispensed with one hand. Both the bottle and the pump are declared suitable for contact with cosmetics; declarations of conformity are provided with the product.
The clear material shows how much content is left in the bottle, as well as the colour of the product. PET is lightweight and does not break when dropped, which matters for packaging used in the bathroom or when travelling. The rounded bottle is comfortable to hold even with a wet hand.
What it is suitable for
- Liquid soap and shower gel – a liquid to medium-thick consistency is drawn up by the pump without difficulty, and one dose is approximately 1.4 ml.
- Shampoo and conditioner – the 500 ml volume corresponds to a family-size pack for the shower, the pump helps prevent waste, and the packaging does not need to be opened with wet hands.
- Body and face lotion – dispensing one dose at a time suits products that are applied repeatedly during the day.
- Massage and make-up removing oil – the oil comes out of the pump in a measured dose and does not drip down the neck.
- Micellar water and face toner – the pump dispenses directly onto a cotton pad or into the palm, without touching the bottle neck.
How to use the set
The bottle is filled up to the nominal volume of 500 ml, not to the brim. The nominal volume is the amount the packaging is designed for under normal filling. The brimful capacity is the physical volume up to the neck, and you can find it in the parameters. The difference between the two provides a reserve for the pump with its dip tube, which is immersed in the content once screwed on, and for the expansion of the product with temperature changes. If the bottle is filled to the brim, the content will be pushed out through the neck when the pump is screwed on.
The pump is screwed onto the neck and pressed several times before first use, until the dip tube and the pump are filled with the product. The dip tube length is matched to the height of the bottle, so it draws the content from the very bottom. With thick creams, butters and products with particles, such as scrubs, the pump draws poorly or becomes clogged. For such products, a jar or container is more suitable.
Before the first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol, and leave them to dry completely. Residual water in the packaging dilutes the product and puts a strain on its preservative system.
Good to know
Clear plastic does not protect the content from light. For light-sensitive products, such as oils with a high proportion of unsaturated fatty acids or formulations with dyes and essential oils, we recommend storing them away from direct sunlight or choosing dark packaging. For shower gels and liquid soaps that are used up within a few weeks, a clear bottle is usually not a problem.
The PET bottle is not intended for hot filling. The product is filled only after it has cooled to room temperature, otherwise the plastic may become deformed. The material should not be exposed to aggressive chemicals. For products with a high proportion of alcohol, solvents or concentrated essential oils, we recommend testing on one piece first and observing the packaging for several weeks.
The set is declared for contact with cosmetic products. It is not intended for food use, for example for kitchen oils or syrups.
Both parts can be used repeatedly. When changing the content, rinse the pump with warm water by pumping clean water through it several times, and leave it to dry. The bottle has a 24/410 neck finish, so other closures with the same neck type from the Handymade range can also be used on it. With your own combination, we recommend checking the seal and dispensing with the specific formulation. For recycling, the PET bottle and the PP pump are sorted as plastic; unscrew the pump from the bottle before disposal.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 500 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 500
- Brimful capacity
- 522 ml
- Diameter
- 61,5 mm
- Thread type
- 24/410
- Height
- 206,5 mm
Transparent Plastic Pump, 24/410, FBOG 200 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.












































