PLASTIC BOTTLES
Rounded Clear Plastic Bottle, Transparent Spray with Glossy Silver Collar, 100 ml
Pack size100 ml150 ml200 ml300 ml
A clear 100 ml PET bottle with a fine mist sprayer and a glossy silver collar is designed for cosmetics applied as a fine mist: facial toners, hydrosols, refreshing face and body sprays, hair tonics or detangling… full description
Lowest price in the last 30 days: €1.00
Total for 1 pcs: €1.00
Quantities add up across all combinations of this bottle.
Product description
A clear 100 ml PET bottle with a fine mist sprayer and a glossy silver collar is designed for cosmetics applied as a fine mist: facial toners, hydrosols, refreshing face and body sprays, hair tonics or detangling sprays. The clear plastic shows the colour of the contents and how much liquid is left. The bottle and the sprayer share the same 24/410 neck finish, and both parts are declared suitable for contact with cosmetics.
What the set is suitable for
- Toners and hydrosols – the sprayer disperses thin, water-based liquids evenly and without droplets, and when applying to the face the contents do not come into contact with your hands.
- Refreshing and hair sprays – body mists and hair sprays with hydrosol or glycerine, as long as they stay liquid and do not become sticky.
- Auxiliary solutions in the workshop – an alcohol solution for disinfecting work surfaces or moulds, or spraying alcohol onto the surface of soap to prevent soda ash. With a higher alcohol content, we recommend first testing how the plastic behaves with your specific formulation.
- Samples and travel size – a volume of 100 ml is enough for several weeks of use, and the clear bottle allows you to check the contents quickly.
How the sprayer dispenses
The sprayer is operated by pressing the head and pumps mechanically, without a propellant. One press releases approximately 0.12 ml of liquid, so two to three presses are enough to treat the face. The head and the body of the sprayer are clear, and the collar on the neck is made of glossy aluminium.
The nozzle is set for liquids with a consistency close to water. Thick gels, emulsions or vegetable oils will not be sprayed; they come out as a stream or drops and may clog the nozzle. If your formulation contains a gum or a thickener, try a small amount first.
The dip tube of the sprayer is longer than the height of the bottle requires. Before screwing it on for the first time, shorten it with an angled cut so that the end almost touches the bottom. The sprayer will then draw up even the last millilitres and no air remains in it.
Nominal volume and filling
The nominal volume of 100 ml is the amount the bottle is designed for under normal filling. The brimful capacity given in the parameters is the physical volume up to the neck. The difference provides a reserve for the dip tube and the lower part of the sprayer, which extend into the bottle, and for the expansion of the contents when the temperature changes. Fill up to the nominal volume. An overfilled bottle may overflow once the sprayer is screwed on, and liquid left on the thread becomes sticky over time.
Good to know
- Transparency and light – clear PET does not protect the contents from light. Formulations with light-sensitive ingredients belong in dark packaging or in a drawer, not on a bathroom window sill.
- Preparation before first filling – wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Spray clean water or alcohol through the sprayer and empty it.
- Heat – PET deforms at higher temperatures, so only fill it with contents that have cooled down. A hot hydrosol or decoction will make the bottle shrink and deform.
- Essential oils and solvents – in high concentrations they may cloud or soften the plastic. For strongly fragranced or alcohol-based formulations, we recommend a trial filling lasting several weeks.
- Reuse – the bottle and the sprayer can be washed and used again. Rinse the dip tube and the nozzle with warm water and spray several times; the scent of the previous contents may linger in the sprayer for a while.
- Recycling – the bottle is made of PET, and the sprayer combines polypropylene and an aluminium collar. Separate the two parts before disposal.
- Other closures – the bottle has a 24/410 neck finish, so other closures with the same neck type from our range, or ready-made sets, will also fit it. If you make your own combination, check the seal and the dispensing with your specific formulation.
The set is not intended for contact with food. This applies to both the bottle and the sprayer, so do not fill it with syrups, cooking oils or drinks.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 100 ml, without cap
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




































































