PLASTIC BOTTLES
Rounded Clear Plastic Bottle, Transparent Plastic Pump, 100 ml
Pack size100 ml200 ml300 ml500 ml
A clear PET bottle with a volume of 100 ml and a pump with a 24/410 neck finish makes a complete packaging set for liquid and medium-thick cosmetic products that are dispensed by pressing. full description
Lowest price in the last 30 days: €0.65
Total for 1 pcs: €1.04
Quantities add up across all combinations of this bottle.
Product description
A clear PET bottle with a volume of 100 ml and a pump with a 24/410 neck finish makes a complete packaging set for liquid and medium-thick cosmetic products that are dispensed by pressing. The bottle is lightweight and shatterproof, and the clear plastic shows the contents and how much is left. The pump dispenses the product without unscrewing, so it suits uses where the packaging is opened several times a day: liquid soap, cleansing gel, shampoo or conditioner in travel size, body lotion or facial emulsion. The set is declared suitable for contact with cosmetics. Neither the bottle nor the pump has a food-contact approval, so the set is not intended for food.
How the set works
The bottle and the pump have the same neck finish, so the pump screws on directly without an adapter. One press dispenses approximately 1.4 ml of product, which for liquid soap or lotion corresponds to one standard dose. The dip tube of the pump is supplied longer than this bottle requires. Before screwing the pump on for the first time, shorten the tube with a sharp knife or scissors so that its end reaches just above the bottom. A tube that is too long bends and the pump does not draw up the product as well.
The pump works best with liquid to medium-thick products. Thick creams and butters are not drawn up through the tube, or only partially. A jar or a bottle with a wider neck is more suitable for them.
Nominal and brimful volume
The nominal volume is the volume the bottle is intended for in normal filling. The brimful volume, stated in the parameters, is the physical volume up to the neck and is larger. The difference serves as a reserve for the dip tube of the pump and for the expansion of the contents when the temperature changes. Fill up to the nominal volume, not to the brim. If the bottle is overfilled, the product is pushed out through the thread when the pump is screwed on.
What the set is suitable for
- Liquid soap and cleansing gels – the classic use of a pump at the sink or in the shower, the product is dispensed without your hands touching the neck.
- Shampoo and conditioner – in a travel or trial size.
- Body lotion, facial emulsion, liquid cream – with emulsions, check that they are drawn up smoothly and that they do not spray out when pressed.
- Massage and body oils – the pump handles lighter oils. With thicker oils, test first how well they are drawn up.
Good to know
Clear PET does not protect the contents from light. Products with sensitive active ingredients, unstabilised oils or natural dyes are better suited to an amber or otherwise tinted bottle. If you want to stay with clear packaging, store the finished product away from direct light.
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. It is enough to rinse the pump several times with clean water and let it drain. The same procedure applies to repeated use.
Do not expose the packaging to aggressive chemicals. For anhydrous products with a high proportion of essential oils or with solvents, we recommend testing the behaviour of the bottle with your specific formulation beforehand on a single piece.
The bottle is made of PET, the pump of PP. They are separated for recycling: the pump is unscrewed and removed together with the dip tube. You can find further closures with the same neck finish and ready-made bottle and closure combinations in the Handymade range. If you make your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific product.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 100 ml, without cap
Transparent Plastic Pump, 24/410, FBOG 200 mm
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



























































