PLASTIC BOTTLES
Rounded Clear Plastic Bottle, White Fine Mist Spray, 200 ml
Pack size100 ml150 ml200 ml300 ml500 ml
A clear PET bottle with a volume of 200 ml and a white mini trigger sprayer with a 24/410 neck finish forms a ready-to-use set for liquid products applied by spraying. full description
Lowest price in the last 30 days: €0.99
Total for 1 pcs: €0.99
Quantities add up across all combinations of this bottle.
Add 83 more pcs and the price drops to €0.94/pc.
Product description
A clear PET bottle with a volume of 200 ml and a white mini trigger sprayer with a 24/410 neck finish forms a ready-to-use set for liquid products applied by spraying. It is suitable for facial and body toners, hydrosols, refreshing sprays for the skin or hair, and alcohol-based or water-based household solutions. The clear plastic shows the contents and their level, so you can see how much product is left in the bottle. Both the bottle and the sprayer are declared suitable for contact with cosmetic products.
What the set is suitable for
The sprayer disperses the contents into a fine mist, so it makes the most sense for thin, watery liquids. The thicker the product, the harder it is for it to get through the nozzle and the sooner it clogs it.
- Toners and hydrosols – water-based products with low viscosity pass through the nozzle without problems, and a volume of 200 ml lasts for several weeks of daily use.
- Hair sprays and leave-in conditioners – water-based solutions with solubilised oils or proteins, as long as they remain liquid.
- Air fresheners and room sprays – alcohol-based solutions with a fragrance composition, textile sprays or surface cleaning solutions. With concentrated fragrances, we recommend testing how PET behaves with your specific blend.
- After-sun or after-shave body sprays – thin gels and solutions with aloe, panthenol or hydrosols, as long as their viscosity stays close to that of water.
Oils, thick serums, emulsions and creams do not belong in this set. The sprayer either cannot push them out, or it produces a thin stream instead of a mist.
Nominal and total volume
The nominal volume of 200 ml is the amount the bottle is designed for in normal filling. The total brim-full volume given in the parameters is the physical volume up to the neck. The difference between them is a reserve for the tube and body of the sprayer and for the expansion of the contents when the temperature changes. Fill the bottle up to the nominal volume, not to the brim.
The dip tube of the sprayer is longer than the bottle. Shorten it with a diagonal cut so that it reaches just above the bottom. A straight cut that sits flat against the bottom restricts the intake of the last few millilitres.
How to use the set
The sprayer is screwed onto the neck of the bottle and pressed several times before first use until the tube and piston fill with the contents. One press dispenses approximately 0.12 ml. This indicative value helps you estimate how many presses correspond to one application. The white collar of the sprayer is smooth, without grooves, and is easy to wipe clean.
Before the first filling, wash the bottle and the sprayer, disinfect them with alcohol (IPA or ethanol) and leave them to dry completely. After disinfection, pump clean water or alcohol through the sprayer several times so that the internal mechanism is rinsed as well. The bottle and the sprayer can be reused. After emptying, simply rinse them, clean them and disinfect them again. When you change the formulation, pump the sprayer through thoroughly so that the products do not mix.
PET is sensitive to heat. Do not fill the bottle with a hot liquid, and do not leave it in the sun or near a heat source. The material may deform, and the contents expand in the heat.
Good to know
Clear plastic does not protect the contents from light. Store light-sensitive products, for example those with a high proportion of essential oils, vitamin C or natural dyes, away from direct light, or choose dark packaging for them. The bottle is light and, unlike glass, does not break, so it is suitable for travel, for the bathroom and for the work desk. For formulations with concentrated essential oils, a higher proportion of alcohol or solvents, we recommend carrying out a short compatibility test with the material before filling a larger quantity.
The sprayer in the bottle is not completely airtight. Volatile components, mainly alcohol and fragrances, are slowly lost over time. With room sprays this usually does not matter, but with more expensive cosmetic products you should expect to use up the contents within a reasonable time. Water-based products without alcohol require preservation just as in any other packaging, and the sprayer itself does not prevent microbial contamination.
The bottle is made of PET and the sprayer of PP, and both belong in sorted plastic waste. Empty them and separate them before disposal. If you want to combine the bottle with a different closure, you will find closures with the same 24/410 neck finish and ready-made combinations in the Handymade range. If you make your own combination, check the seal, the dispensing and the behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 200 ml, without cap
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



































































