PLASTIC BOTTLES
Rounded Clear Plastic Bottle, White Fine Mist Spray, 100 ml
Pack size100 ml150 ml200 ml300 ml500 ml
Clear round plastic bottle, white fine mist sprayer, 100 ml A ready-made set for your own sprays: a clear round PET bottle with a volume of 100 ml and a white mechanical fine mist sprayer with a smooth collar. full description
Lowest price in the last 30 days: €0.76
Total for 1 pcs: €0.76
Quantities add up across all combinations of this bottle.
Product description
Clear round plastic bottle, white fine mist sprayer, 100 ml
A ready-made set for your own sprays: a clear round PET bottle with a volume of 100 ml and a white mechanical fine mist sprayer with a smooth collar. Both the bottle and the sprayer are declared suitable for contact with cosmetics, so the set can be used for home and professional toners, hydrosols, face and hair sprays or alcohol-based hand products. The clear plastic shows the contents and their level, the bottle is lightweight and does not break when dropped.
The set is intended for cosmetics. It does not have a certificate for food contact, so it is not suitable for homemade oils, syrups or herbal infusions.
What the set is suitable for
- Toners and hydrosols – the sprayer disperses low-viscosity water-based solutions into a mist that spreads evenly on the skin.
- Refreshing and setting face sprays – facial mists with glycerine or water-soluble active ingredients can be applied without touching the skin with your hands.
- Hair sprays – water-based conditioning and shine products, optionally with a solubilised oil.
- Alcohol-based products – fresheners, deodorising sprays or hand products containing ethanol. We recommend testing how PET behaves with the specific concentration of alcohol and fragrance components.
- Room and fabric sprays – scented water-alcohol mixtures for freshening a room or laundry.
Thick emulsions, creams, gels and pure oils do not belong in a mechanical sprayer. They either do not pass through the tube and nozzle, or they leave the nozzle in a stream instead of a mist. Bottles with a pump or jars are more suitable for such contents.
How the sprayer dispenses
One press releases approximately 0.12 ml of the contents. A few presses are enough to refresh the face, and hair sprays are applied section by section, without soaking. The sprayer has a smooth white collar without ribbing and screws onto the bottle in the same way as a standard cap.
Before first use, pump the sprayer several times into the air until the tube fills and the mist comes out evenly.
The sprayer tube is longer than the bottle. Before the first filling, you can shorten it so that it reaches just above the bottom and does not bend. A bent tube draws in air and the sprayer then sprays unevenly.
Filling and volume
The nominal volume of 100 ml is the amount the bottle is intended for under normal filling. The brimful capacity, stated in the parameters, is the physical volume of the bottle up to the neck and is larger. The difference between the two values is a reserve for the sprayer tube and for the expansion of the contents when the temperature changes. Fill to the nominal volume, not to the brim. If you filled it up to the neck, part of the contents would be pushed out when the sprayer is screwed on.
Pour the contents into the PET bottle only after they have cooled. Hot liquid can deform the plastic, and the neck may then no longer seal properly.
Good to know
- Light – clear PET does not protect the contents from light. Store products with essential oils, vitamins or light-sensitive extracts in the dark.
- Preparation before filling – wash and rinse the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol, then let them dry completely. The sprayer is disinfected by spraying alcohol through the nozzle.
- Compatibility with the contents – PET is resistant to common water-based and low-alcohol products. Concentrated essential oils and some solvents can damage the plastic over time, so with such ingredients we recommend a test with a small amount and checking the bottle and the nozzle after several weeks.
- Reuse – after thorough washing and disinfection, the set can be filled again. When changing the contents, spray clean water through the sprayer and then alcohol, so that no residues of the previous product remain in the tube.
- Other closures – the bottle has a 24/410 neck finish, so you can also combine it with other closures with the same neck type from the Handymade range. For your own combination, check the seal and the dispensing with the specific formulation.
- Recycling – the bottle is made of PET and the sprayer of PP. Separate them before disposal and sort them as plastic.
The sprayer is not intended for thick emulsions or pure oils. If you want to spray an oil-based product, first check with a small amount whether the nozzle produces a mist and whether it clogs after a few days.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 100 ml, without cap
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.































































