White Plastic Bottle, Black Spray, 150 ml

White plastic bottle, black mini trigger sprayer, 150 ml is a ready-to-fill set consisting of a white PET bottle and a black mini trigger sprayer with a 24/410 neck finish. When pressed, the sprayer disperses the contents into a fine mist, so the set is suitable for facial toners, hydrosols and refreshing mists, hair sprays and herbal waters for everyday use. The opaque white wall reduces the amount of light reaching the contents, and PET does not break when dropped, so the bottle can travel in a bag or stand on the edge of a sink.

The set as a whole is declared suitable for contact with cosmetics. Only the bottle has a certificate for direct contact with food; the sprayer does not, which is why the set is intended for cosmetic products.

How the set works

• Mini trigger sprayer – the contents are dispensed by pressing the head, without compressed gas. Each press releases a small, repeatable amount, which saves the contents and allows a toner or hydrosol to be applied evenly to the face, hair or fabric.
• Ribbed collar – the grooved edge of the collar gives your fingers a grip. The sprayer is easy to tighten and loosen, and does not slip even in wet hands.
• Clear dip tube – draws the contents from the bottom of the bottle, so the remaining liquid can be used up as well.
• White PET bottle – low weight and impact resistance.

Nominal volume and filling margin

The volume of 150 ml is the nominal volume, that is, the amount the bottle is designed for in normal filling. The brimful capacity is the physical volume up to the neck and is slightly larger. The difference between the two forms a margin for the tube and the sprayer collar and for the expansion of the contents when the temperature changes.

What it is suitable for

• Facial toners and hydrosols – thin water-based solutions spray without problems and are applied evenly, without your fingers touching the contents.
• Hair and body mists – light leave-in hair sprays, moisturising mists and water-based skin refreshers.
• Alcohol-based sprays – hand refreshers, room or fabric sprays with an alcohol base. The fine mist speeds up evaporation.
• Working solutions in the workshop – spraying ethanol or isopropyl alcohol (IPA) to disinfect work surfaces and tools.

Good to know

Before the first filling, wash both the bottle and the sprayer, disinfect them with IPA or ethanol and let them dry completely.

The sprayer is designed for thin, watery liquids. Thick emulsions, gels and oils will not be sprayed by the mechanism – they are either not dispensed at all or released in drops, and the nozzle becomes blocked over time. For oil-based and cream products, choose a different type of closure.

The set can be used repeatedly. After emptying, rinse the sprayer with clean water and spray several times to flush residues from the nozzle and tube. Wash the bottle and disinfect it again before the next filling. After coloured or strongly scented contents, check whether the sprayer and tube have been stained or would carry the scent over to the next filling.

For recycling, unscrew the PP sprayer from the PET bottle and dispose of both parts as plastic according to the material codes on the packaging.

If this sprayer does not suit you, you can find closures with the same neck type given in the parameters, as well as other ready-made combinations, in the Handymade range. If you make your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.

Frequently asked questions