PLASTIC BOTTLES
White Plastic Bottle, White Lotion Pump With Glossy Silver Collar, 150 ml
Pack size100 ml150 ml200 ml250 ml300 ml
The white plastic bottle with pump, 150 ml , combines an opaque PET bottle with a pump with a 24/410 neck finish into ready-to-use packaging for liquid and semi-liquid cosmetic products. full description
Lowest price in the last 30 days: €1.26
Save €0.02 with this set
Total for 1 pcs: €1.26
Quantities add up across all combinations of this bottle.
Product description
The white plastic bottle with pump, 150 ml, combines an opaque PET bottle with a pump with a 24/410 neck finish into ready-to-use packaging for liquid and semi-liquid cosmetic products. One press dispenses approximately 1 ml of product, so the product can be dispensed repeatedly without unscrewing the closure and without touching the contents of the bottle. The white wall hides the contents from view, and the PET bottle is lightweight and does not break when dropped, which suits both the bathroom and travel.
A volume of 150 ml corresponds to a common pack size for liquid soap, body lotion or shampoo for home use. The pump is white with a silver detail and matches the white bottle in colour, so the finished packaging looks uniform.
Suitable uses
- Liquid soaps and cleansing gels – the contents are dispensed with one hand straight into the palm, the bottle stays closed and no water from the sink gets into the product.
- Body lotions and lighter emulsions – the pump handles thinner to medium-thick textures, which are difficult to pour from a bottle with a cap or pour out too quickly.
- Shampoos and conditioners of thinner consistency – 150 ml lasts for several weeks of use, and in an opaque bottle you do not need to worry about the appearance of the contents.
- Hair and body oils – dispensing by the millilitre limits overdosing and spills. We recommend testing how a specific oil behaves with the pump before filling larger quantities.
Volume and filling
Nominal volume is the quantity the bottle is designed to hold in normal filling. The total brimful volume is larger because it also includes the space in the neck. This difference serves as a reserve for the dip tube of the pump, for the air above the surface and for the expansion of the contents when the temperature changes. Therefore, fill only up to the nominal volume, not to the brim, otherwise the contents will overflow when the pump is screwed on.
Before fitting the pump, shorten the dip tube according to the height of the bottle so that it reaches the bottom and does not bend. Then press the pump several times to prime it until the tube fills and dispensing becomes even.
Contact with cosmetics and food
The bottle has a declaration of suitability for contact with cosmetic products and, separately, a certificate for direct food contact. No such declarations are available for the pump, so the set as a whole is intended for cosmetics. For your own formulation, we recommend checking the tightness, the dispensing and the behaviour of both parts with the specific product.
The set of bottle and pump is not approved for food contact. The food certificate applies only to the bottle itself without the closure, so do not use this set for homemade oils or syrups.
Good to know
- Preparation before first filling – wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Pump clean water through the pump and then alcohol, so that the inner parts are rinsed as well.
- Heat – PET should not be exposed to heat. Fill emulsions and gels into the bottle only after they have cooled to room temperature, and do not store the finished product next to a radiator or in direct sunlight.
- Aggressive ingredients – the bottle should not be exposed to aggressive chemicals. For formulations with concentrated essential oils, a higher share of alcohol or solvents, we recommend a trial filling and checking the bottle and the seal after several weeks.
- Product thickness – the pump does not draw up thick creams and butters, or dispenses them unevenly. If the product does not appear even after repeated pressing, the consistency is too thick for this pump.
- Reuse – once used up, the bottle and the pump can be washed, disinfected and refilled. When switching to a different product, flush the pump so that residues of the previous product do not mix with the new one.
- Recycling – the bottle is made of PET, and the pump combines plastic with aluminium. Before disposal, therefore, separate the two parts and empty them.
Other closures with the same 24/410 neck finish, as well as ready-made combinations of the bottle with other closures, can be found in the Handymade range.
Frequently asked questions
Parameters
White plastic bottle, 150 ml 24/410, without cap
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

































































