+421 950 333 113info@handymade.store−10 %Shop now

PLASTIC BOTTLES

White Plastic Bottle, White Lotion Pump With Glossy Silver Collar, 250 ml

Pack size100 ml150 ml200 ml250 ml300 ml

The white plastic bottle with a pump, 250 ml , is intended for liquid soaps, shower gels, shampoos, conditioners and body lotions, that is, for products that are dispensed in portions by pressing the pump head. full description

AvailabilityIn stock · 176 pcs
Product codeO24PB250-OVD24BS
€1.28incl. VAT

Lowest price in the last 30 days: €1.28

Volume pricing
1–199 pcs€1.28Your price
200–999 pcs€1.17−8 %
1000–4999 pcs€1.13−12 %
from 5000 pcs€1.02−20 %

Total for 1 pcs: €1.28

Quantities add up across all combinations of this bottle.

Product description

The white plastic bottle with a pump, 250 ml, is intended for liquid soaps, shower gels, shampoos, conditioners and body lotions, that is, for products that are dispensed in portions by pressing the pump head. The bottle is made of PET, a lightweight plastic that does not break when dropped. It is therefore well suited for use by the sink and in the shower, where glass packaging could slip from a wet hand.

The pump dispenses approximately 1 ml of the contents per press. You do not need to open or tilt the bottle during use, and the product is not scooped out with your fingers. This is especially appreciated with hand soap and with products used by several people.


What it is suitable for

  • Liquid soaps and shower gels – the portion is dispensed with one hand and the bottle stays in place.
  • Shampoos and conditioners – the same amount can be dispensed with every wash, which makes it easier to estimate consumption.
  • Body lotions and thinner creams – liquid emulsions are easier to dispense with a pump than from a jar. Thick creams and body butters belong in a jar.

Pump and consistency of the contents

The contents are drawn up through a tube from the bottom of the bottle. The stated dose is approximate: with thicker products it may be smaller and the pump head returns more slowly after pressing.

Products with solid particles (scrubs, products with dried herbs) and very thick gels may clog the mechanism. It is worth testing a new formulation in a single bottle before filling the whole batch.

After fitting the pump for the first time, prime it by pressing the pump head several times. A full dose will only start to come out once the tube and the mechanism have filled with the product.


Nominal and total volume

The nominal volume is the amount the bottle is designed for in normal filling. The total brimful volume is the physical volume up to the neck and is slightly larger. The difference serves as a reserve for the pump, whose tube and mechanism take up space in the bottle, and for the expansion of the contents when the temperature changes. Fill the bottle up to the nominal volume and leave the space under the neck free, otherwise the product will overflow when the pump is fitted.


Good to know

Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Run lukewarm water through the pump, then the disinfectant, and let it dry thoroughly before fitting it.

PET softens with heat. The product should therefore be filled only after it has cooled down, as a hot mixture may deform the bottle. Undiluted essential oils, solvents and other aggressive substances may damage the plastic. For products with a higher proportion of essential oils or alcohol, we recommend testing with a filled bottle.

Suitability for contact with cosmetic products is declared for the bottle.

Only the bottle on its own has a certificate for direct food contact; the pump does not. The set as a whole is intended for cosmetics and should not be used for syrups, oils or other foods.

Closures with the same neck finish (stated in the parameters) and ready-made combinations can be found in the Handymade range. If you make your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.

An empty PET bottle is recycled as plastic. The pump combines plastic with aluminium and should be unscrewed from the bottle before sorting.


Frequently asked questions

How much does the pump on the 250 ml plastic bottle dispense per press?
The pump dispenses approximately 1 ml of the contents per full press. The value is approximate and applies to liquid products. With thicker shampoos or body lotions the dose may be smaller. After fitting the pump for the first time, prime it by pressing the pump head several times until the tube fills and the dispensing becomes consistent.
Is the 250 ml plastic bottle with a pump suitable for food?
No, the bottle and pump set is not approved for food contact. Only the PET bottle on its own has a certificate for direct food contact; the pump does not. The set should therefore not be used for syrups, oils or other foods. As a whole it is intended for cosmetic products, for example liquid soaps, shampoos and body lotions.
Does the white plastic bottle with a pump protect the contents from light?
Light protection is not declared for the white plastic bottle with a pump. White plastic hides the colour of the contents, but this does not guarantee protection of light-sensitive ingredients. For products with such ingredients, we recommend verifying stability with a test in a filled bottle. It will show whether the colour or scent of the product changes over time.
Can the plastic bottle with a pump be reused?
Yes, both the bottle and the pump can be reused if they are cleaned thoroughly before the next filling. Wash the bottle with lukewarm water, disinfect it with isopropyl alcohol or ethanol and let it dry. The pump is harder to clean because product residues remain in the mechanism and the tube. Pump lukewarm water through it and then the disinfectant. For products intended for sale, a new pump is the safer choice.
Can a product with essential oils be filled into a PET bottle with a pump?
For products with essential oils, we recommend verifying compatibility with the PET bottle and the pump by testing. Undiluted essential oils and solvents may damage the plastic and should not be filled into this bottle. When testing with the finished product, check whether the bottle deforms, whether its appearance changes and whether the pump works in the same way as at the start.

Parameters

Plastic bottle, white, 24/410, without cap, 250 ml

Product colour
White
Country of origin
European Union
Nominal capacity
250
Diameter
50 mm
Thread type
GL24
Height
164 mm
Product material
PETPlastic

Plastic dispenser, 24/410, white-silver, 180 mm

Product colour
SilverWhite
Country of origin
China
Diameter
27,5 mm
Thread type
24/410
Height
205 mm
Dose
1 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, white, 24/410, without cap, 250 ml · O24PB250PDF ↓
Plastic dispenser, 24/410, white-silver, 180 mm · OVD24BSPDF ↓
PDSProduct Data Sheet
Plastic bottle, white, 24/410, without cap, 250 ml · O24PB250PDF ↓
Plastic dispenser, 24/410, white-silver, 180 mm · OVD24BSPDF ↓
DrawingTechnical drawing
Plastic bottle, white, 24/410, without cap, 250 ml · O24PB250PDF ↓
Plastic dispenser, 24/410, white-silver, 180 mm · OVD24BSPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.