+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

Wooden wicks

Wooden wick, .03 Booster crackling, 12.7 mm, 100 pcs

The Booster series wooden wick is a crackling wick for container candles . When burning, it produces a crackling sound reminiscent of a fireplace, so the candle catches attention not only with its scent but also with… full description

AvailabilityIn stock · last 1 pack
Product codeSVKW3-SVKP1_100
€126.05incl. VAT

Lowest price in the last 30 days: €126.05

What's in the set
100× Wooden wick, .03 Booster crackling, 12.7 mmDrevený knôt, .03 Booster praskajúci, 12,7 mm ZASOBA

Product description

The Booster series wooden wick is a crackling wick for container candles. When burning, it produces a crackling sound reminiscent of a fireplace, so the candle catches attention not only with its scent but also with sound. A reinforcing layer (booster) is added to the wooden slat, which gives the series its name.

It comes as a set with a round metal stand, so the wick just needs to be placed on the bottom of the container and poured over with wax. A pack of 100 pieces of wicks with stands is suitable for candle production in smaller batches.


What makes this wick interesting

  • Crackling when burning – the wick belongs to the Crackling Booster series, meaning it is among crackling wooden wicks.
  • Reinforcing layer – the wick's slat is complemented by a layer referred to as a booster.
  • Stand included – the wick is inserted into the stand's clip, which holds it upright on the bottom of the container.
  • Wood from certified sources – the manufacturer describes the wick as natural, allergen-free and biodegradable.

Use in candle making

The wick is designed for container candles. The process is straightforward:

  • Insert the wick into the stand's clip.
  • Secure the stand to the centre of the container bottom, for example with a wick sticker or a drop of hot wax.
  • Pour the wax and allow it to set completely.
  • Trim the wick according to the container height and wax level.

The wood can be trimmed with sharp scissors or cutting pliers, both before and after pouring.

On the first burn, let the candle burn until the wax pool reaches the edge of the container. This prevents tunnelling around the wick on subsequent burns.


Choosing the width and test burning

Wick width is chosen according to the internal diameter of the container. A width of 12.7 mm is therefore only a starting point. The result is also affected by the type of wax, fragrance oil percentage, dye, and the shape and material of the container.

The figure .03 is the manufacturer's designation for the slat thickness. A higher number means a thicker slat.

Every new combination of wax, fragrance and container is worth verifying with a test burn. The candle is left to burn for several hours and the following are observed:

  • flame height,
  • width and depth of the melt pool,
  • soot formation,
  • container temperature.

If the flame goes out or the wax near the walls remains unmelted, a wider wick is called for. If the flame is high, produces smoke and the container heats up noticeably, a narrower wick is needed.


Good to know

  • Trimming before each lighting – the charred tip is broken off or cut before the next burn so that clean wood is burning.
  • Lighting – the flame is applied across the full width of the wick, not just to one corner.
  • Amount of fragrance and dye – a high proportion of fragrance oil or dye can dampen combustion and reduce crackling. Repeat the test burn whenever you adjust the formula.
  • Stand in narrow containers – the stand has a circular base. For containers with a narrow or convex bottom, check that it sits flat on a level surface.

A wick that is too long or a charred tip that has not been removed leads to a high flame, soot and overheating of the container. For this reason, state on the finished candle's label that the wick should be trimmed before each lighting.


Frequently asked questions

Why does the Booster wooden wick crackle when burning?
The crackling is produced by the burning of the wood the Booster wick is made from. The intensity of the sound is not the same for every candle. It can be affected by the type of wax, the amount of fragrance oil, the dye and the wick length. More pronounced crackling is usually achieved with a correctly trimmed wick and an appropriate fragrance dosage. Quieter burning is not a defect of the wick.
Which container is the Booster wooden wick with a width of 12.7 mm suitable for?
The suitability of the Booster wooden wick with a width of 12.7 mm for a specific container is verified by test burning. The decisive factors are the internal diameter of the container, the type of wax, the fragrance and dye proportions, and the container's shape. Before producing a larger batch, verify that the melt pool reaches the edge and the flame is not too high. If the wax near the walls remains unmelted, a wider wick is called for.
What do the Booster designation and the .03 thickness mean for the wooden wick?
Booster designates a wooden wick whose slat is complemented by a reinforcing layer. This wick belongs to the Crackling Booster series, placing it among crackling wicks. The figure .03 is the manufacturer's designation for the slat thickness. A higher number means a thicker slat. When selecting a wick, both width and thickness are therefore considered, and the specific combination is verified by test burning.
How is the Booster wooden wick trimmed?
The Booster wooden wick is trimmed with sharp scissors, cutting pliers or wick trimmers. It is first adjusted to the container height, either before pouring the wax or after it has set. It is then trimmed before each subsequent lighting. The charred part can simply be carefully broken off so that no residue falls into the wax, leaving clean wood to burn.
What is the metal stand for with the Booster wooden wick?
The metal stand holds the Booster wooden wick upright on the bottom of the container during pouring and while the wax sets. The wick is inserted into the clip and the stand is secured to the centre of the bottom. The stand has a circular base and is suitable for straight, double and cross wooden wicks. This pack includes one stand per wick.

Parameters

Round Metal Sustainer for Wooden Wicks

Country of origin
USA
Dimensions
20 × 20 mm (kruhová základňa SM/2)
Product material
Steel

Wooden wick, .03 Booster crackling, 12.7 mm

Product colour
Brown
Country of origin
USA
Processing method
Drying
Height
127,0 mm
Product material
Wood
Dimensions
šírka 12,7 mm (.5"), výška 127,0 mm (5"), hrúbka .03

Product documentation

PDSProduct Data Sheet
Round Metal Sustainer for Wooden Wicks · SVKP3PDF ↓
TDSTechnical Data Sheet
Wooden wick, .03 Booster crackling, 12.7 mm · SVKW3PDF ↓
Download all (ZIP)

2 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.