+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

Wooden wicks

Wooden wick, .04 crackling, 6.4 mm, short, 100 pcs

The .04 crackling wooden wick gives a candle a gentle crackling sound like the one you know from a fireplace. It is a flat wick made from a single wooden slat, designed for container candles . full description

AvailabilityIn stock · last 1 pack
Product codeSVKW19-SVKP1_100
€68.12incl. VAT

Lowest price in the last 30 days: €68.12

Save €16.88 with this set

What's in the set
100× Wooden wick, .04 crackling, 6.4 mm, shortDrevený knôt, .04 praskajúci, 6,4 mm, krátky ZASOBA

Product description

The .04 crackling wooden wick gives a candle a gentle crackling sound like the one you know from a fireplace. It is a flat wick made from a single wooden slat, designed for container candles. It differs from a classic cotton wick both in appearance and sound.

The pack contains 100 wicks with round metal sustainer tabs, so nothing extra needs to be purchased for assembly. Suitable for those who make candles regularly or in batches. The short length is designed for smaller glasses, tins, and jars.


What makes this wick interesting

  • Crackling sound – the single-layer slat crackles gently as it burns, giving the candle an atmosphere that a cotton wick cannot create.
  • Wide flame – the flat wick with a width of 6.4 mm burns across the full width of the slat, resulting in a lower and wider flame than a cotton wick.
  • Sustainer included – the round metal base is designed for flat wooden wicks and holds the slat upright at the bottom of the container during pouring and while the wax sets.
  • Certified wood – the wick is made from certified wood. The manufacturer describes it as a natural, biodegradable material free from allergens.

Use in candle making

The wick is used in candles poured into glass, tins, or ceramic containers. The wick in its metal sustainer is placed in the centre of the bottom of a clean, dry container. It is advisable to secure the sustainer to the bottom, for example with a wick sticker or a drop of melted wax, so it does not shift during pouring. The wax is then poured slowly alongside the wick. The wooden slat is rigid and in most cases stays upright without a centering tool.

The container diameter for which this width and thickness is suitable cannot be determined by a single number. The deciding factors are the type of wax, the proportion of fragrance oil, the dye, and the shape of the container.

Before producing a larger batch, we recommend making a test candle in the specific container with the specific wax and fragrance. A correctly chosen wick will melt the wax evenly to the edge of the container, will not smoke, and the flame will be neither too high nor too weak.


Good to know

A wooden wick behaves differently from a cotton one, and the most common issues are related to its length. A wick that is too long cannot draw enough wax, causing the flame to weaken or go out. It should therefore be trimmed before each lighting. Wick trimmers or small flush-cut pliers work well for this.

Before lighting, trim the wick just above the wax surface and remove any charred edge. A clean, short wick burns more evenly.

Further practical notes:

  • First burn – the candle should burn until the wax has melted evenly across the entire surface to the container wall. This prevents a tunnel from forming around the wick.
  • Lighting – the flame of the lighter is applied across the full width of the slat. Tilting the container slightly can help.
  • Effect of fragrance and dye – a higher proportion of fragrance oil or dye affects burning behaviour. If the flame weakens, a different wick width or thickness is usually required, not a longer wick.
  • Trimming – if the wick is too tall for the container, it can be trimmed with scissors or pliers before pouring the wax.

A finished candle should never be left burning unattended and should be placed on a heat-resistant surface away from draughts.


Frequently asked questions

Why does a wooden wick crackle when burning?
Crackling is a natural characteristic of a burning thin wooden slat. This wick is made from a single layer of wood and belongs to the crackling series, in which the sound is clearly audible. The intensity of crackling varies depending on the wax used, the amount of fragrance oil, and the wick length. A freshly trimmed wick with no charred edge typically crackles more noticeably.
What size candle is a 6.4 mm wooden wick suitable for?
The appropriate container diameter depends on the wax, the proportion of fragrance, and the dye, so it is determined by test burning. No fixed value that applies to all formulas is available. During the test, check whether the wax melts evenly to the edge of the container and whether the flame smokes. If the full surface does not melt or the flame is too high, try a different wick width or thickness.
How is a wooden wick secured in a candle container?
A wooden wick is secured in the container using the metal sustainer tab included in the pack. The sustainer with the wick is placed in the centre of the bottom and secured with a wick sticker or a drop of wax so it does not shift during pouring. The base holds the slat upright, so the wick remains straight during both pouring and setting.
Why does a candle with a wooden wick go out?
The most common cause is a wick that is too long or has a charred tip, which prevents it from drawing enough wax. Trimming it just above the wax surface and removing the burnt edge after the candle has cooled — ensuring no wood remnants remain in the wax — will help. A second cause is tunnelling around the wick after a short first burn, where pooled wax floods the flame. If the problem persists, the formula likely requires a different wick width or thickness.
What does the .04 designation on a wooden wick mean?
The .04 designation indicates the thickness of the wooden slat, where a higher number means a thicker slat. Together with the wick width, it determines how strongly the wick burns and how much wax it can melt. The thickness is selected according to the wax and candle formula, and its suitability is verified by test burning.

Parameters

Round Metal Sustainer for Wooden Wicks

Country of origin
USA
Dimensions
20 × 20 mm (kruhová základňa SM/2)
Product material
Steel

Wooden wick, .04 crackling, 6.4 mm, short

Product colour
Brown
Country of origin
USA
Processing method
Drying
Height
76,2 mm
Product material
Wood
Dimensions
šírka 6,4 mm (.25"), výška 76,2 mm (3"), hrúbka .04

Product documentation

PDSProduct Data Sheet
Round Metal Sustainer for Wooden Wicks · SVKP3PDF ↓
TDSTechnical Data Sheet
Wooden wick, .04 crackling, 6.4 mm, short · SVKW19PDF ↓
Download all (ZIP)

2 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.