ALUMINUM BOTTLES
Aluminium Bottle, White Pump, 225 ml
Pack size50 ml100 ml200 ml225 ml
The aluminium bottle with a white pump is a ready-to-use dispensing set for liquid and medium-thick cosmetic products for everyday use: body lotion, liquid hand soap, shampoo, shower gel, massage oil or cleansing oil. full description
Lowest price in the last 30 days: €2.88
Total for 1 pcs: €2.88
Quantities add up across all combinations of this bottle.
Product description
The aluminium bottle with a white pump is a ready-to-use dispensing set for liquid and medium-thick cosmetic products for everyday use: body lotion, liquid hand soap, shampoo, shower gel, massage oil or cleansing oil. The bottle, with a nominal volume of 225 ml, is made of aluminium, and the white pump with a 24/410 neck finish is made of polypropylene. The set is declared suitable for contact with cosmetics.
Aluminium is opaque, so no light reaches the contents. Oils and products with light-sensitive ingredients benefit from this in particular. Compared with glass, the bottle is lighter and does not break when dropped, which is useful in the bathroom, when travelling and in a massage studio. The silver bottle with a white pump looks uniform and suits your own brand as well as homemade cosmetics.
How it dispenses and seals
Each press of the pump dispenses approximately 1 ml of product. This corresponds to a typical portion of liquid soap, hand lotion or massage oil for one area of the body, so the contents are used up evenly and without spilling. The pump screws directly onto the neck of the bottle and seals once tightened. Keep the thread clean, as dried product residues impair the seal. Before the first filling, check that the dip tube reaches the bottom of the bottle. If it is longer, shorten it with a sharp knife to the height of the bottle, otherwise it may bend at the bottom and the pump will draw in air.
The pump handles liquid to medium-thick products. It will not dispense thick creams, butters and balms: the dip tube becomes blocked and the mechanism stays pressed down. With thicker emulsions, test the dispensing on a small sample before you fill the whole bottle.
Nominal and total volume
The nominal volume is the volume the bottle is designed for under normal filling. The total brimful volume given in the parameters is the physical volume up to the neck. The difference is a reserve for the dip tube and the body of the pump, which take up part of the space once screwed on. You should therefore fill the bottle up to the nominal volume. If you fill it to the neck, the pump pushes the product out through the thread as you screw it on and the set leaks.
Suitable for products such as
- Body and face lotions – light emulsions with a liquid to slightly thick consistency, which the pump dispenses effortlessly.
- Liquid soap, shampoo, shower gel – rinse-off products used several times a day, where a single pump dose makes measuring easier.
- Massage and cleansing oils – water-free oil products, which the aluminium bottle protects from light.
- Micellar waters and toners – water-based products for which a pump is better suited than a sprayer.
The usual preservation requirement applies to water-based and emulsion products, just as in any other packaging. The pump limits finger contact with the contents but does not replace a preservative system.
Good to know
Before the first filling, wash the bottle and the pump, disinfect them with ethanol or isopropyl alcohol and leave them to dry completely. Follow the same procedure when reusing them, as residues of the old product would otherwise spoil the new contents.
We recommend that you test on a small amount whether the bottle and the pump are compatible with your specific formulation, especially for water-based products and for products with a higher proportion of essential oils or solvents. Check the tightness of the thread and the behaviour of the pump.
Only the plastic pump has a separate certificate for direct contact with food. The aluminium bottle does not have one, so the set as a whole is intended for cosmetics. Do not use it for homemade oils, syrups or herbal infusions.
Sort the empty bottle as aluminium packaging. Before disposal, unscrew the pump and sort it separately as plastic.
The bottle has a 24/410 neck finish, so it can also be fitted with other closures with the same neck type from the Handymade range. If you make your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 225 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
















































