Yes, the packaging can be used repeatedly if correct hygiene principles are observed. Before each new filling, we recommend thoroughly cleaning the bottle, removing any residues of the original product and then disinfecting it with a suitable product, for example with isopropyl alcohol or with 96% denatured plant‑based ethanol. After disinfection, allow the inside of the packaging to dry completely at room temperature and only then proceed with refilling. When changing the type of product (e.g. from an oil‑based to a water‑based product), thorough cleaning and disinfection are particularly important.

The aluminium bottle is ideal for liquid and slightly viscous products that require protected and opaque packaging. You will use it mainly for facial and body waters, hair tonics, oil serums and massage oils, aromatherapeutic oil blends and working solutions for cosmetic production. Thanks to its robust construction and low weight, it is also suitable for travel sizes or product samples that you want to present to clients or customers.

For long‑term stability of the contents, we recommend combining several steps: use the purest raw materials possible, work under hygienic conditions, thoroughly clean and disinfect the bottle before the first filling and before each refilling, and always close it with a suitable closure. Store finished products away from direct sunlight, at a stable room temperature, and minimise frequent opening of the packaging. For formulations with a higher water content, consider the use of preservatives according to the type of product and the intended use.

If you decide not to use the bottle repeatedly, it is appropriate to recycle it responsibly according to the recommendations given in the product parameters. Before placing it in sorted waste, remove any remaining contents and empty the packaging as much as possible. Then adapt placing it in the correct container to the recycling symbols or to the information directly in the parameter table on the product page. In general, metal packaging is sorted into the appropriate container for metals according to the collection system in your area. By following these principles, you will support reuse of the material and reduction of waste.

To make selecting packaging easier, there is an advanced filter, which you will find at the top of the page after clicking on the relevant packaging category. It allows you to narrow down the offer according to parameters that are key for your project – in particular according to the type and size of the neck, the total volume or size of the packaging, the colour and the material. By combining these filters, you will quickly find bottles, medicine bottles, jars or pots that will suit the consistency of your product and the desired dosing method.