You can safely use the aluminium bottle repeatedly if you follow basic hygiene principles. Before each new filling, it is necessary to clean the packaging thoroughly and then disinfect it with a suitable alcohol-based preparation, for example isopropyl alcohol IPA 99 % or plant-based ethanol ethanol 96 % denatured. Proper cleaning and disinfection help minimise the microbiological risk and extend the safe usability of your cosmetic and hygiene products.

This type of bottle with spray pump is most suitable for liquid products that require even atomisation into a fine mist. These are mainly face and body waters, refreshing sprays, hair products, aromatherapeutic and room sprays, hand products or disinfectant solutions. Thanks to atomisation in a thin layer, the contents are used evenly and without unnecessary waste.

Before reuse, we recommend rinsing the bottle with warm water and a suitable mild cleansing agent, rinsing thoroughly with clean water and allowing it to dry. It is then necessary to disinfect both the packaging and the spray mechanism with alcohol – for example the products IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based. It is advisable to pump the alcohol through the spray pump itself so that the internal part of the system is cleaned and disinfected.

If you decide not to use the bottle further, we recommend recycling it according to the material composition stated in the product parameters. The aluminium body of the bottle can usually, after basic rinsing, be placed in the container intended for metal waste, while the plastic spray pump is typically sorted among plastics. Before handing it over for separate collection, it is advisable that the packaging is free from product residues and basically cleaned. Adjust the exact method of sorting to the local waste collection rules and the information given with the product.

The bottle is suitable for most common cosmetic and hygiene formulations, including products containing alcohol or essential oils. However, considering the differing composition of formulations, we recommend carrying out your own test – fill a smaller amount of product and observe the behaviour of the packaging and the spray pump (sealing, functionality, changes in appearance or any possible leakage) over several days. In this way, you will verify the long-term compatibility of your specific formulation.

To make it easier to choose the right packaging, you can use the advanced filter, which you will find at the top of the page after clicking on the relevant category (for example bottles, jars or dispensers). In the advanced filter you can clearly select the required parameters, such as neck type, packaging size, colour and material. By combining these filters, you quickly narrow the offer down to only those packaging options that meet the technical and design requirements of your product.