The packaging can be reused if hygiene principles are observed. Before each new filling, the bottle must be thoroughly cleaned and then disinfected with a suitable alcoholic preparation, for example isopropyl alcohol IPA 99 % – isopropyl alcohol or plant‑based ethanol Ethanol 96 % denatured plant‑based. After cleaning and disinfection, allow the packaging to dry completely and only then fill it again.

First remove residues of the original product by mechanically rinsing with warm water and a suitable cleaning agent. Then rinse the bottle thoroughly with clean water. After washing, the packaging must be disinfected – we recommend using IPA 99 % – isopropyl alcohol or Ethanol 96 % denatured plant‑based, which are applied to the inner walls of the packaging, for example by rinsing or spraying. After disinfection, let the bottle air‑dry in a clean environment so that no moisture residues remain inside.

If you decide not to reuse the packaging, we recommend recycling it according to the material types specified in the product parameters. The glass part should, after removal of product residues, be placed in the container designated for glass. Plastic or combined parts of the dispenser and any seals are sorted according to the material marking (usually into plastic waste). Before handing over for recycling, rinse the packaging at least roughly so that larger product residues do not remain inside.

The medicine‑bottle with dispenser is ideal mainly for liquid and low‑viscosity preparations where precise and hygienic dosing is important. In practice, it is used for facial serums, toners, fluids, spot treatment products, hair tonics and preparations intended for targeted application to the skin. Thanks to the dispenser, it is also suitable for products that are concentrated and used in small amounts.

The simplest way is to use the advanced filter in the packaging categories. After clicking on the relevant category (for example bottles, medicine bottles or cosmetic packaging), you will find the filter at the top of the page. There you can select parameters such as neck type, size, colour or packaging material and thus quickly narrow down the selection to the packaging that is most suitable for your product.

We recommend storing filled bottles in a dry, clean place protected from direct sunlight and significant temperature fluctuations. For cosmetic formulations, it is advisable to follow the recommendations of the formula manufacturer, especially regarding the maximum storage temperature. Always close the bottles carefully with the dispenser to minimise the contact of the contents with air and impurities.