The glass bottle with dropper is suitable primarily for liquid and medium-viscosity products where precise dropwise dosing is desired. For thicker oils or gels we always recommend testing flow and dosing on a smaller sample to verify that the dropper provides comfortable application.

The packaging can be reused if proper hygiene principles are followed. Before each new filling, the bottle and the dropper must be thoroughly cleaned and disinfected, ideally using isopropyl alcohol or ethanol (e.g. products available on Handymade: IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based). At the same time we recommend ensuring that the new contents do not differ significantly in composition from the original product, or carrying out thorough cleaning and a compatibility test between them.

Before filling we recommend mechanically rinsing the bottle, removing residues of the original contents and then disinfecting the surfaces with a suitable alcohol, for example the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. After applying the disinfectant solution, allow the alcohol to evaporate, keep the packaging in a clean and dry environment and only then proceed to filling with the final product.

If you decide not to reuse the packaging, recycling according to the material type stated in the product parameters on Handymade is recommended. The glass bottle can usually be placed in a container intended for glass, and it is advisable to remove any remaining contents. The closure with dropper generally belongs in mixed waste or plastic, according to the material designation in the parameter table. When sorting, always follow local recycling rules and the information given for the specific product.

To select the right packaging you can use the advanced filter located at the top of the page after clicking on the relevant packaging category. In the filter you can conveniently choose parameters such as neck type, size, colour or packaging material and thus narrow the offer down to products that meet your purpose. By combining these filters you can easily find a suitable bottle, medicine bottle, jar or other container for a specific formulation.

Yes, the small volume and precise dropper dosing make this bottle a practical packaging for samples, test series or laboratory trials of formulations. It allows convenient labelling using stickers and at the same time a professional presentation of the product to customers or business partners. Before filling each new batch, again follow the recommended cleaning and disinfection procedures so that the test results are consistent.