GLASS BOTTLES up to 10 ml
Amber Glass Bottle, Type B, Slim, Glossy Golden Black Pump with Smoky Overcap, 10 ml
Amber glass medicine bottle, type B, tall, black and gold pump, smoky overcap, 10 ml An amber glass medicine bottle with a pump is packaging for serums and oil concentrates that light gradually degrades. full description
Lowest price in the last 30 days: €1.04
Total for 1 pcs: €1.04
Quantities add up across all combinations of this bottle.
Product description
Amber glass medicine bottle, type B, tall, black and gold pump, smoky overcap, 10 ml
An amber glass medicine bottle with a pump is packaging for serums and oil concentrates that light gradually degrades. Each press dispenses a measured dose, so the contents do not touch your fingers and the bottle does not stand open. Amber glass filters light, which makes this set suitable for products with vitamin C, retinoids, unstable vegetable oils or essential oils. The nominal volume of 10 ml is enough for samples, travel packs, eye serums, facial oils and more expensive concentrates that are dosed by the drop.
The glossy black and gold pump with a smoky overcap gives the packaging the look of a finished product from the shelf. The overcap protects the pump head from dust and from accidental pressing during transport.
What the set is suitable for
- Facial and eye serums – liquid and light gel formulations that are applied in small amounts and require precise dosing.
- Oil serums and facial oils – dark glass slows down the oxidation of light-sensitive oils, and the pump dispenses without your fingers touching the contents.
- Light fluid emulsions – thin milks and fluids that the pump draws up and dispenses without problems.
- Samples and travel packs – at 10 ml the product is used up before it has time to oxidise, and you can test a formulation without using a large amount of raw materials.
How the pump works
One press dispenses approximately 0.14 ml of the contents, which corresponds to a few drops. This amount suits concentrated serums, where the customer needs a small and repeatable dose. The pump will not draw up a thick cream or balm, or it will dispense it unevenly. The set is therefore not intended for solid and very viscous formulations.
The pump tube is supplied longer than the height of the bottle. Before the first filling, shorten it with a sharp knife or scissors so that the end reaches just above the bottom and the pump draws up as much of the contents as possible. After filling and screwing on the pump, press the head several times until the system is primed and starts to dispense.
Fill the bottle up to the nominal volume of 10 ml, not to the brim. When the pump is screwed on, the tube and the lower part of the pump are immersed in the contents, and without a reserve the product would be pushed out through the neck.
Nominal and total volume
The nominal volume is the amount the packaging is designed for in normal filling. The total brimful volume is the physical volume of the glass up to the neck and you can find it in the parameters. The difference between them forms a reserve for the immersed part of the pump and for slight expansion of the contents when the temperature changes. A formulation is therefore measured according to the nominal volume.
Good to know
The glass bottle has a declaration of suitability for contact with cosmetic products and, separately, a certificate for direct contact with food. The pump does not have such a declaration. The set as a whole is therefore not approved for food and is intended for cosmetics. We recommend checking how the pump behaves with your specific formulation before filling in larger batches.
Before the first filling, wash the glass, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the pump with clean water, then with ethanol, and pump it several times empty so that no moisture remains inside.
For recycling, unscrew the pump from the glass. The glass belongs in glass waste; the pump is a combination of polypropylene and aluminium and is sorted as plastic, where this is possible in your area.
Closures with the same neck type as the bottle and other ready-made packaging and closure combinations can be found in the Handymade range. If you make your own combination, check the tightness, the dosing and the behaviour of the packaging with your specific formulation.
For postal shipping or packing in a suitcase, place the bottle in a self-sealing bag. The pump does not seal the contents as tightly as a solid cap, and any leak would damage your other belongings.
Frequently asked questions
Parameters
Glass bottle, vial type B, tall, 18 mm, 10 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 10
- Brimful capacity
- 12 ml
- Diameter
- 24,2 mm
- Thread type
- 18/410
- Height
- 63,7 mm
- Product material
- Glass
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
























































































