GLASS BOTTLES up to 10 ml
Amber Glass Bottle, Type B, Slim, Gold White Dropper, 10 ml
Pack size10 ml50 ml
The amber glass medicine bottle, type B, tall, with a white and gold dropper, is a ready-made set for dropwise dispensing in a volume of 10 ml . full description
Lowest price in the last 30 days: €0.89
Total for 1 pcs: €0.89
Quantities add up across all combinations of this bottle.
Product description
The amber glass medicine bottle, type B, tall, with a white and gold dropper, is a ready-made set for dropwise dispensing in a volume of 10 ml. The amber glass protects the contents from light, which you will appreciate with facial serums, oil blends with essential oils, tinctures and concentrates that lose their effectiveness faster in light. The tall, slim shape of the medicine bottle and the dropper with a glass tube, silicone bulb and white and gold cap form a closed pack ready for filling. The set is declared as suitable for contact with cosmetics.
What the set is suitable for
The volume of 10 ml suits small doses that are used up quickly, and that is exactly the case for products with a higher proportion of active ingredients.
- Facial serums and oil concentrates – with the dropper you measure out one to several drops per application, and the contents do not touch your fingers.
- Essential oil blends – the amber glass reduces light exposure and the dropper tube is made of glass, not plastic.
- Oils for nails, beard or hair ends – a small amount for spot application, which makes sense to pack in a smaller format.
- Tinctures and alcohol extracts – dark glass is the usual packaging for them, and the dropper makes it easier to measure the dose.
- Samples and test batches – when developing a formulation, it helps to have a format in which a small amount of the finished product can be handed out or set aside.
Filling and volume
The medicine bottle has a nominal volume of 10 ml; the total brimful volume is higher and we state it in the parameters. The nominal volume is the amount the packaging is designed for with normal filling. The total volume is the physical space up to the neck. The difference between them leaves room for the dropper tube, which displaces part of the contents when screwed in, and for the expansion of the contents when the temperature changes. For this reason, fill up to the nominal volume, not to the brim.
For the first filling, measure out 10 ml of water, insert the dropper and check where the liquid level sits. You can then more easily estimate the filling height for thicker oil blends, which are harder to measure.
The length of the dropper is matched to this tall medicine bottle. The tube reaches deep and the contents can be drawn up even at a lower level. Dispensing works best with liquids of low to medium viscosity. Thick gels or very viscous oils are drawn up slowly and are released unevenly from the tube. We recommend testing how the silicone bulb behaves with your specific formulation on a small amount, especially with a high proportion of essential oils or solvents.
Good to know
Before the first filling, wash the medicine bottle and the dropper, disinfect them with isopropyl alcohol or ethanol and let them dry completely. With oil products, residual water in the tube shows up as cloudiness.
Do not fill the glass with hot contents and do not expose it to sudden temperature changes. Emulsions and oil blends are filled only after they have cooled to room temperature, otherwise there is a risk of cracking, and the volume of the contents will change again after cooling.
Store and use the set in an upright position. When it is laid on its side, the contents get into the bulb of the dropper, where they are harder to clean out and, with some ingredients, may affect the bulb material over time.
Only the glass medicine bottle on its own has a certificate for direct contact with food. The dropper does not have one, so the set as a whole is intended for cosmetic use.
Before sending by post or travelling, check that the dropper seals tightly on the filled medicine bottle. It is safer to transport the contents with a solid cap with the same neck finish and to enclose the dropper separately.
You can find closures with the same neck type, stated in the parameters, and other ready-made combinations in the Handymade range. If you make your own combination, we recommend testing the tightness, dispensing and behaviour of the packaging with your specific formulation.
After use, wash the medicine bottle and reuse it; glass belongs in the glass recycling. The dropper is made of several materials, so before disposal take it apart into the glass tube, the silicone bulb and the plastic and aluminium cap.
Frequently asked questions
Parameters
Glass bottle, vial type B, tall, 18 mm, 10 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 10
- Brimful capacity
- 12 ml
- Diameter
- 24,2 mm
- Thread type
- 18/410
- Height
- 63,7 mm
- Product material
- Glass
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



















































