Yes, the glass pharmaceutical bottle can be used repeatedly if hygiene rules are observed. Before each new filling, the packaging must be thoroughly cleaned, any residues of the previous fill removed and then disinfected with a suitable agent, for example isopropyl alcohol or ethanol. For disinfection you can use the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured vegetable. Only after the alcohol has completely dried and ventilated is the packaging ready for further use.

The pharmaceutical bottle is particularly suitable for liquid and low- to medium-viscosity formulations where precise dosing and reliable closure are important. In practice, it is used for facial and hair tonics, serums, oils, herbal extracts for external use, aromatic blends and various auxiliary solutions for cosmetic or artisan production. Thanks to the standardized neck, it can also be adapted for dropper or spray use depending on the closure selected.

Before reuse, first remove residues of the original fill by rinsing with warm water and a suitable cleaning agent. After thoroughly rinsing with clean water, allow the pharmaceutical bottle to drain and dry. We then recommend disinfecting the packaging with alcohol – for example with the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured vegetable. After applying the alcohol, let the packaging dry completely and ventilate thoroughly so that no residual odour or droplets remain inside that could affect the new formulation.

If you decide not to use the packaging further, we recommend recycling it according to the types of materials listed in the product parameters. The glass body of the bottle can generally be placed in a container intended for glass after emptying and basic rinsing, while the closure (for example metal or with plastic components) must be sorted according to local waste management rules – often into a container for metal or mixed packaging. Before handing it over for collection, make sure that no significant product residues remain in the packaging that could make the recycling process more difficult.

To make it easier to select packaging, you can use the extended filter in the packaging material categories. After clicking on the relevant category, the extended filter is located at the top of the page and allows you to quickly select a suitable packaging according to several parameters – specifically by type and size of the neck, overall size of the packaging, colour and material. Thanks to this, you can easily find a bottle, jar or pot that will match the required dosing, design and the properties of your formulation.