Glass packaging is generally very suitable for formulations containing alcohol, vegetable oils and essential oils, since glass is a chemically stable material. Nevertheless, we recommend performing your own compatibility test with every new product – fill a small amount of the formulation, observe any changes in odour, colour and viscosity, and verify that the cap still seals well even after longer storage. In this way you will verify that the combination of the specific product and packaging is fully suitable for your needs.

Yes, the glass medicine bottle can be used repeatedly if hygiene principles are followed. Before each new filling, the packaging must be thoroughly cleaned, rinsed and then disinfected with a suitable agent, for example isopropyl alcohol or ethanol. For effective disinfection we recommend the products IPA 99 % isopropyl alcohol 1 l or Ethanol 96 % denatured plant-based 1 l. After applying the disinfectant, let the packaging dry completely and only then refill it, in order to minimize the risk of microbial contamination and undesirable reactions with the product.

When cleaning the glass medicine bottle, we recommend first removing product residues with warm water and a suitable cleaning agent that does not damage the glass or the cap seals. Then rinse the packaging several times thoroughly with clean water so that no cleaner residues remain. After washing, the disinfection step is important – you can use for example IPA 99 % isopropyl alcohol or plant-based ethanol 96 %. After applying the disinfectant, let the bottle and the cap dry naturally at room temperature in a clean place, so that no impurities or dust enter the packaging.

If you decide not to reuse the packaging, we recommend sorting it into separate waste according to the material. After emptying and basic rinsing, the glass bottle should be placed in a container intended for glass, while plastic or metal parts of the cap must be sorted separately according to local waste collection rules. Before recycling, check the material information listed in the product parameters in our e-shop, so that you know to which fraction the individual components belong. In this way, you support efficient processing of secondary raw materials and reduce environmental burden.

To make packaging selection easier, there is an extended filter located at the top of the page after clicking on the relevant packaging material category. Using the filter, you can narrow down the offer clearly according to several parameters – for example according to neck type, overall size and volume, colour or packaging material. By combining these criteria, you will quickly find bottles, jars or pots that meet the requirements of your specific formulation as well as the visual style of your brand.