EASTER DISCOUNTS!
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
The plastic bottle with spray pump is a practical packaging intended for fine dispersion of liquids, ideal for cosmetic products, DIY formulations and professio... read more
1,14 € incl. VAT
The plastic bottle with spray pump is a practical packaging intended for fine dispersion of liquids, ideal for cosmetic products, DIY formulations and professional products alike. Thanks to the combination of a transparent container and a functional sprayer, it enables convenient application as well as good visual control of the contents.
The packaging is designed to ensure convenient dosing in the form of a fine mist, which is particularly suitable for products where even application on the skin, hair or surface is important. The transparent design makes it easier to check remaining quantities and to plan stock refills.
This bottle belongs to standalone packaging and is compatible with various types of closures and dispensing systems (for example screw caps, droppers, sprayers or practical applicators) according to the selected parameters. Combinations of packaging and closures created directly on Handymade are tested and functional. However, for all combinations we always recommend carrying out your own compatibility test (sealing, dosing and behaviour of the packaging in contact with the specific formulation).
All technical parameters of the packaging are given in the attached Packaging Quality Certificate and in the product parameters.
Yes, the packaging can be reused with appropriate handling, but we recommend observing strict hygiene rules. Before each new filling, the bottle and the sprayer must be thoroughly cleaned and then disinfected, for example using IPA 99% isopropyl alcohol or ethanol 96% denatured plant-based. Only then is it suitable to refill the packaging with a fresh formulation.
First we recommend rinsing the packaging with a suitable cleaning solution or with warm water and a mild detergent (if it is compatible with the previous filling). Then the bottle, dip tube and spray mechanism must be thoroughly rinsed with potable water, allowed to drain, and only then disinfected, for example using isopropyl alcohol or plant-based ethanol. Allow the disinfectant to act briefly, pour out the excess and let the packaging dry completely at room temperature away from direct sunlight.
This plastic bottle is not intended for filling with hot or freshly boiled solutions. High temperatures can cause deformation of the packaging and of the functional parts of the sprayer and reduce their service life. Fillings should only be poured into the bottle after they have completely cooled down to room temperature. The packaging is not suitable for washing in a dishwasher or for boiling, therefore we recommend gentle manual cleaning and disinfection with suitable alcohols.
If you decide not to reuse the packaging, we recommend first emptying it and removing as much as possible of any residues of the original product. Then separate the individual parts according to the material stated in the product parameters (for example the bottle body and the separate sprayer). Plastic parts corresponding to separately collected plastic should be placed into the appropriate container for plastic waste according to local rules. Metal or composite components that cannot be sorted belong in mixed municipal waste. By following the recycling instructions according to the material designation in the parameter table, you help to minimise environmental impact.
To make selection easier, we recommend using the advanced filter, which you will find at the top of the page after clicking on the selected packaging category. In the filter you can set key parameters such as neck type, size, colour or packaging material. By combining these criteria, you will quickly narrow the selection down to the packaging that best matches your formulation and the desired dosing method.
