Before filling, we recommend thoroughly cleaning the bottle and then disinfecting it with a suitable alcoholic preparation. For disinfection, you can use the products IPA 99% isopropyl alcohol or Ethanol 96% denatured, plant-based. After applying the alcohol, allow the inner surface and the spray pump to dry well in order to remove residual moisture before filling with the final product.

Yes, the bottle can be used repeatedly provided that hygiene rules are observed. After each complete use, we recommend disassembling the bottle and spray pump, washing thoroughly, rinsing, and then disinfecting with an alcoholic solution (for example IPA 99% isopropyl alcohol or Ethanol 96% denatured, plant-based). Before refilling, allow all parts to dry completely. Always also take into account the type of product being prepared and its requirements for packaging cleanliness.

The behaviour of the spray pump depends on the design of the pump itself and on the formulation (viscosity, content of oils, alcohol, etc.). If the spray is too fine or conversely produces larger droplets, we recommend testing an adjustment of the formula (especially the proportion of water, alcohol and oil phases) or choosing another type of packaging from the categories with sprays and dispensers. When selecting a new solution, always perform your own compatibility test – fill a small volume of product and observe dosing, evenness of spraying, and sealing of the packaging.

If you decide not to reuse the packaging, we recommend its responsible recycling. After emptying and basic rinsing, place the glass part of the bottle into glass recycling according to the recommendations of your local collection system. The plastic part of the spray pump (head, tube) is to be sorted according to the plastic type stated in the product parameters, or handed over at a collection yard if local rules do not allow sorting of this plastic type in standard containers. Always follow the information in the parameter table on the product page and your local waste management guidelines.

For easier selection, we recommend using the advanced filter that you will find at the top of the page after clicking on the relevant packaging category (for example bottles, medicine bottles, spray pumps, etc.). In the advanced filter you can sort the packaging according to several parameters – especially neck type, size, colour and material. This allows you to quickly find a combination of packaging and closure that will best suit your specific formulation and the desired method of dosing.

We recommend storing filled bottles in a dry place, at a stable room temperature and away from direct sunlight, in order to minimise changes in product properties. Always close the bottle carefully with the spray pump and, when transporting, place it in an upright position to reduce the risk of liquid leakage. For formulations containing alcohol or volatile substances, ensure sufficient ventilation of the workplace during filling as well as when storing a larger number of units.