The suitability of the plastic jar for packing food supplements and tablets is governed by the information in the product parameters and in the attached packaging quality certificate. Before using it for a specific type of preparation, we recommend checking these documents and performing your own stability and compatibility test of the contents with the packaging, especially for products with specific composition or higher sensitivity to moisture.

The jar can be reused if hygienic principles are observed, for example when refilling the same type of tablets or capsules. However, before each new filling the packaging must be thoroughly cleaned and disinfected. For professional disinfection we recommend using suitable agents, for example isopropyl alcohol IPA 99 % (/ipa-99-isopropyl-alkohol-1-l/ target="_blank") or ethanol 96 % denatured, plant-based (/etanol-96-denaturovany-rastlinny-1-l/ target="_blank"). This minimises the risk of microbial contamination and residues of the original contents.

The induction liner functions optimally when it is applied according to the recommended procedure of the manufacturer of the induction sealing device. After filling the container, the closure is firmly screwed on and the liner is activated by the action of the induction field, creating a continuous barrier between the contents and the environment. We always recommend producing a trial batch, checking the integrity of the seal and then verifying the behaviour of the product during storage. For normal home use it is necessary to pay particular attention to sufficiently tightening the closure and checking that the liner is not mechanically damaged.

Before re-use we recommend first mechanically cleaning the jar from residues of the original product and then rinsing it with a suitable cleaning agent. After rinsing with clean water, it is necessary to ensure disinfection of the internal space and the closure. For this purpose, IPA 99 % (/ipa-99-isopropyl-alkohol-1-l/ target="_blank") or ethanol 96 % denatured, plant-based (/etanol-96-denaturovany-rastlinny-1-l/ target="_blank") can be used, for example. After applying the disinfectant, allow all parts of the packaging to dry thoroughly at room temperature to prevent dilution of the next filling with residual liquid.

If you decide not to use the packaging further, we recommend recycling it according to the type of plastic indicated in the product parameters. Before placing it in sorted waste, it is advisable to empty the jar, remove any residue of the contents and lightly rinse the packaging. Then dispose of it in the appropriate container for sorted plastic waste in accordance with local rules. By correct recycling you reduce the amount of waste and support the re-use of the material in the next production cycle.

The simplest way to find suitable packaging is to use the advanced filter in the packaging material categories. After clicking on the selected category, the option to filter according to several parameters appears at the top of the page. You can clearly select the packaging according to neck type, size, colour and material, which significantly speeds up the selection of the right bottle, jar or pot for a specific project. By combining several filters, you can easily narrow the offer down to the packaging that best matches your requirements.