Yes, the packaging can be used repeatedly if handled and stored correctly. However, from a hygiene point of view it is essential that you thoroughly clean and disinfect the bottle and the spray head before each new filling. We recommend using disinfectant alcohols such as isopropyl alcohol or ethanol, for example the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. Carry out disinfection in such a way that, when filling a new product, the bottle is dry and clean and no cross-contamination of different formulations occurs.

We recommend first rinsing the bottle with warm (not boiling) water after emptying it, optionally with a small amount of a mild cleaning agent suitable for the type of product you have stored in the container. Then use clean water to remove residues of the cleaner and, after rinsing, it is advisable to disinfect the packaging with a suitable alcohol solution (for example IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based). After disinfection, allow the bottle and sprayer to dry completely at room temperature in a clean environment. This type of plastic material is not intended for boiling or for aggressive chemical disinfection, which could damage the surface or the seals of the sprayer.

If you decide not to use the packaging further, we recommend recycling it in accordance with local waste sorting rules according to the type of plastic stated in the product parameters. Before handing it over for sorted collection, it is advisable to empty the bottle and ideally also rinse it so that no product residues remain in it. Where possible, the bottle and sprayer should be separated so that the individual parts can be assigned to the correct type of plastic waste according to the local collection system. In this way you support efficient recycling of materials and minimise the burden on the environment.

When storing the packaging with liquid contents, it is advisable to protect it from direct sunlight and extreme temperatures, which can negatively affect not only the plastic itself but also the stability of the product inside. Always store the bottle tightly closed, ideally in an upright position, in order to minimise the risk of leakage in case of possible damage to the seal. During transport and carrying, it is advisable to protect the packaging from mechanical damage, for example impacts or strong compression, which could affect the functionality of the trigger mechanism of the sprayer.

To select a suitable packaging, you can use the extended filter, which is available at the top of the page after clicking on the relevant packaging material category. In the extended filter, it is possible to search in detail according to several parameters, such as type and neck size, overall size of the packaging, colour or material of the bottle or closure. By combining these filters, you can easily narrow down the selection to packaging that matches your formulation and the required dosing method, which significantly facilitates orientation in the offer and shortens the time needed to find the optimal solution for your product.