GLASS BOTTLES 15 ml
Blue Glass Bottle, Matte Black Dropper, 15 ml
This blue glass bottle with a capacity of 15 ml and a matte black dropper is used for filling and dispensing liquid preparations applied by the drop: facial serums, oil blends for the face and nails, tinctures and… full description
Lowest price in the last 30 days: €0.98
Total for 1 pcs: €0.98
Quantities add up across all combinations of this bottle.
Product description
This blue glass bottle with a capacity of 15 ml and a matte black dropper is used for filling and dispensing liquid preparations applied by the drop: facial serums, oil blends for the face and nails, tinctures and diluted essential oil blends. Blue glass lets through less light than clear glass, so it protects light-sensitive contents better than a clear bottle. The dropper lets you take exactly the amount you need for application. The small volume suits concentrated preparations, samples and trial batches, where filling a larger pack makes no sense.
What the set consists of
The set consists of a glass medicine bottle with an 18/410 neck finish and a dropper with a glass tube, a silicone bulb and a matte black polypropylene cap. The term “medicine bottle” refers to a shape with straight walls and a narrower neck; it says nothing about what is filled into the bottle. The length of the dropper is matched to the height of this bottle.
The blue glass and matte black colour look consistent across the whole range of products. Through the clear tube of the dropper you can see the amount drawn up, which helps when dispensing.
What it is suitable for
- Face and hair serums – both water-based and oil-based, where a few drops are dispensed per use.
- Oil blends and facial oils – blends of vegetable oils with active ingredients that you want to protect from light.
- Diluted essential oils and perfume compositions – oil blends for pulse points or for a diffuser.
- Tinctures and concentrates – alcohol extracts and concentrated solutions of active ingredients, where the exact amount matters.
- Samples and trial batches – the small volume lets you test a formulation or hand out samples without using up a lot of raw materials.
Filling and volume
The nominal volume is the volume the bottle is intended for with normal filling. The brimful volume, that is, the physical volume up to the neck, is larger. The difference between the two values is a reserve for the glass tube of the dropper, which displaces part of the contents once screwed in, and also leaves room for the liquid to expand when the temperature changes.
Always fill to the nominal volume, not to the brim. If the bottle is overfilled, the contents are pushed out through the thread when the dropper is inserted, which soils the neck and weakens the seal of the cap.
Filling itself is easiest with a funnel or a larger dropper. Let thicker oil blends warm up to room temperature so that they run down the wall of the bottle and do not form air bubbles.
Good to know
Preparation before first filling. Before use, wash the bottle and the dropper with warm water, disinfect them with isopropyl alcohol or ethanol and let them dry completely upside down. Residual moisture can affect the stability of the contents in an oil serum or tincture. When disinfecting, squeeze the silicone bulb several times so that the alcohol also gets inside, and then let it air out.
Suitability for cosmetics. The dropper has a declaration of suitability for use with cosmetic products, which you can find in its parameters. The set as a whole is not approved for contact with food, so do not use it for homemade oils or syrups.
Glass and temperature. The bottle is intended for filling with cooled preparations; do not pour hot contents into it. A sudden change of temperature can crack the glass, and hot liquid also strains the silicone bulb.
With concentrated essential oils and alcohol tinctures with a high alcohol content, check how the silicone bulb and the plastic cap behave with your specific formulation. Some ingredients can soften or discolour silicone over time. A test with one bottle before filling the whole batch prevents this.
Reuse. After thorough washing and disinfection, the bottle can be filled again. Check the dropper: if the bulb has lost its elasticity, does not draw up the liquid or has residues of the old contents on it, replace it with a new one with the same neck type. You can find closures with an 18/410 neck finish and other ready-made combinations in the Handymade range. If you make your own combination, check the tightness and dispensing with your specific contents.
Recycling. The bottle belongs in glass recycling. The dropper is made of several materials; before throwing it away, separate the glass tube from the plastic cap and the silicone bulb.
Frequently asked questions
Parameters
Glass bottle, vial, blue, 18 mm, 15 ml
Glass Dropper, Matte Black, 57 mm
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




















































