+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES up to 10 ml

Blue Glass Bottle, Matte Black Dropper, 10 ml

Pack size10 ml15 ml30 ml50 ml

The blue glass bottle with a capacity of 10 ml and a black dropper is a set designed for cosmetics that are dispensed drop by drop . full description

AvailabilityIn stock · 585 pcs
Product codeO18SM010-OVK18CM052
€0.90incl. VAT

Lowest price in the last 30 days: €0.90

Volume pricing
1–199 pcs€0.90Your price
200–999 pcs€0.85−6 %
1000–4999 pcs€0.78−13 %
from 5000 pcs€0.70−22 %

Total for 1 pcs: €0.90

Quantities add up across all combinations of this bottle.

Product description

The blue glass bottle with a capacity of 10 ml and a black dropper is a set designed for cosmetics that are dispensed drop by drop. Coloured glass lets through less light than clear glass, so it suits contents that are sensitive to light, for example facial serums, blends with essential oils or concentrates of active ingredients. The dropper takes up exactly as much as you need, and the rest of the contents does not come into unnecessary contact with fingers or air.

The small volume suits samples, travel packs and products that are used up quickly or made in small batches. The set is declared suitable for contact with cosmetic products.


What the set is suitable for

  • Face and hair serums – both water-based and oil-based, where a few drops are dispensed per use.
  • Essential oil blends – diluted in a carrier oil, for example for massage or aromatherapy.
  • Oil elixirs for the face, nails and moustache – the dropper applies the oil directly to the skin or into the palm.
  • Alcohol extracts for cosmetics – concentrated extracts are dispensed more precisely drop by drop than by pouring.
  • Samples and test batches – when developing a formulation, a small amount that can be labelled and tracked is enough.

How to use the dropper

The dropper consists of a glass tube, a silicone bulb and a plastic threaded closure with an 18/410 neck finish, which fits the neck of the bottle. When you squeeze and release the bulb, liquid is drawn into the tube and can then be dropped onto the skin or into the palm. The size of the drop depends on the consistency of the contents. A thin water-based serum forms smaller drops, a thicker oil larger ones. When tightening, hand-tight is enough so that the silicone bulb and the thread are not deformed.

Do not draw the liquid all the way up into the bulb. Residues of the contents in the silicone part are difficult to clean, and with oils and concentrated essential oils they can affect the elasticity of the bulb over time. With such contents, check the behaviour of the dropper in your specific formulation.


Nominal and total volume

The nominal volume of the bottle is 10 ml, that is, the amount the packaging is designed for with normal filling. The total volume to the brim is larger and you will find it in the parameters. The difference provides a reserve for the dropper tube, which takes up part of the space once screwed on, and for the expansion of the contents when the temperature changes. The bottle is therefore filled to the nominal volume, not to the brim. If it is overfilled, the contents will overflow through the neck when the dropper is fitted.


Good to know

Before the first filling, wash the bottle and the dropper, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residues of water in the tube or on the walls of the bottle can dilute anhydrous products and cause cloudiness in oils.

Glass does not tolerate sudden temperature changes well. Do not pour hot contents into the bottle straight after heating; let them cool to roughly room temperature first. When filling the narrow neck, a funnel or a syringe without a needle will help.

After washing and drying, the bottle can be used repeatedly. Rinse the dropper thoroughly after each use with a different product. If the scent changes noticeably or the tube becomes discoloured, it is better to replace it. Closures with the same neck finish and other ready-made combinations of bottle and closure can be found in the Handymade range. With your own combination, check the tightness, the dispensing and the behaviour of the packaging with your specific formulation.

Glass belongs in glass recycling. The dropper is made of several materials, so before disposal separate the glass tube from the plastic closure and the silicone bulb.


Frequently asked questions

Does the blue 10 ml glass bottle protect the contents from light?
Blue glass lets through less light than clear glass, and so reduces its effect on light-sensitive contents. It is therefore suitable for oils, essential oils and serums with active ingredients. However, it is not a complete barrier, so store the bottle away from direct sunlight.
How much liquid fits into a 10 ml bottle with a dropper?
The bottle is filled to the nominal volume of 10 ml, not to the brim. The total volume to the brim is larger and you will find it in the parameters. The difference leaves room for the dropper tube, which takes up part of the space once screwed on, and for any expansion of the contents when the temperature changes. If overfilled, the contents will overflow when the dropper is fitted.
Is the dropper suitable for both oils and water-based serums?
Yes, the dropper dispenses both oil-based and water-based contents. Thin water-based serums form smaller drops and flow faster, while thicker oils form larger and slower drops. With concentrated essential oils, check how the silicone bulb tolerates longer contact with your specific contents.
How do I clean a bottle with a dropper before reusing it?
Wash the bottle and the dropper in warm water with washing-up liquid, rinse them, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Rinse the dropper tube by drawing in and squeezing out the cleaning solution several times. If any odour or discolouration from the previous product remains in it, replace the dropper with a new one.
Can the 10 ml bottle be used with a closure other than the dropper?
Yes, the neck of the bottle has an 18/410 thread and any closure with the same neck finish fits it. You will find suitable closures and ready-made combinations in the Handymade range. With your own combination, always check the tightness and the behaviour of the packaging with the finished formulation, especially with alcohol-based and oil-based contents.

Parameters

Glass bottle, vial, blue, 10 ml

Product colour
Blue
Country of origin
China
Nominal capacity
10
Brimful capacity
12,5 ml
Diameter
24,8 mm
Thread type
18/410
Height
58 mm
Product material
Glass

Black dropper, plastic, 52 mm

Product colour
Black
Country of origin
China
Thread type
18/410
Dropper length
52 mm
Product material
GlassPPSiliconePlastic

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, vial, blue, 10 ml · O18SM010PDF ↓
PDSProduct Data Sheet
Glass bottle, vial, blue, 10 ml · O18SM010PDF ↓
Black dropper, plastic, 52 mm · OVK18CM052PDF ↓
DrawingTechnical drawing
Glass bottle, vial, blue, 10 ml · O18SM010PDF ↓
Black dropper, plastic, 52 mm · OVK18CM052PDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.