Before the first filling, we recommend mechanically cleaning the bottle and the spray pump (rinsing with a suitable medium depending on the formulation type) and then thoroughly disinfecting them. For disinfecting the packaging, technical alcohol is suitable, for example isopropyl alcohol IPA 99 % isopropyl alkohol 1 l or plant-based ethanol Etanol 96 % denaturovaný rastlinný 1 l. After disinfection, the components must be allowed to air out completely and dry so that moisture does not condense inside the packaging.

The packaging can be used repeatedly when handled correctly, but always under strict hygiene conditions. Before each new filling, the bottle and the spray pump must be cleaned and then disinfected with a suitable alcohol-based preparation, for example IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. We recommend repeated use only if there is no risk of microbial contamination or undesirable chemical reaction between individual fillings.

The spray pump operates on the principle of a mechanical pump that creates a vacuum when pressed and draws up liquid from the bottle using a dip tube. If it does not draw sufficiently, check whether the spray pump is correctly and firmly screwed on, whether the tube is not too long or kinked, and whether there are no coarse deposits inside. For thicker or highly viscous formulations, it may be necessary to slightly adjust the formula or choose a more suitable dispensing type. At first use it is common that the spray pump needs to be pressed several times until the system is completely primed.

If you decide not to reuse the packaging, we recommend recycling it according to the material type specified in the product parameter table. Before placing it in sorted collection, it is advisable to empty the bottle, minimise any product residues and, if possible, separate the basic components (bottle body and spray pump). Then place them in the appropriate container designated for that type of plastic according to local waste-sorting rules. In this way you contribute to more efficient material recycling and to reducing the amount of waste.

For easier selection, we recommend using the advanced filter, which you can find at the top of the page after clicking on the relevant packaging category. Using the filter, you can clearly sort the packaging by key parameters such as neck type and size, overall size or volume, colour and material used. By combining several filters, you can quickly narrow down the range to the packaging that best corresponds to your product and the intended way of use.