Yes, the packaging can be used repeatedly if hygiene principles are observed. Before each new filling, we recommend thoroughly cleaning and disinfecting the bottle and the sprayer to minimize the risk of microbial contamination. For disinfection it is suitable to use, for example, isopropyl alcohol or ethanol, which you can find in the offer as IPA 99 % isopropyl alkohol and Etanol 96 % denaturovaný rastlinný. After rinsing, it is necessary to let all parts dry completely and only then refill the packaging.

The best way to clean the sprayer is to separate it from the bottle, rinse it with lukewarm water and then “pump it through” several times with water or a suitable cleaning solution to flush out the entire feed line and nozzle. After mechanical cleaning, the internal parts can be disinfected using alcohol, which you also pump through the system. Then let all parts dry thoroughly at room temperature. For thicker or oil-based formulations, we recommend carrying out a test to check whether the nozzle is not clogging and to adjust the viscosity or the selected type of packaging accordingly.

When deciding between repeated use and recycling, we recommend first considering whether the bottle can be safely reused after cleaning and disinfection. If you decide not to recycle the packaging by repeated use, follow the recommendations according to the material stated in the product parameters. The glass part is generally suitable for sorting into the glass container after thoroughly emptying any product residues. The plastic sprayer belongs in the sorted plastics, unless local collection rules state otherwise. It is also recommended to separate the individual components (glass and plastic) and not to dispose of the product in mixed waste unless absolutely necessary.

The spray bottle is optimized for low-viscosity, water-based or alcohol-based solutions that allow a fine and even spray pattern. Very thick emulsions or gel products may lead to impaired pump operation or clogging of the nozzle, so for such formulations we recommend choosing another type of dosing (for example a classic pump or a tube). For preparations containing essential oils, it is recommended to verify compatibility first on a smaller trial batch to ensure that there are no changes in flowability or wear of the plastic parts of the sprayer.

To choose a suitable packaging, we recommend using the advanced filter, which you will find at the top of the page after clicking on a specific packaging category. Using the filter, you can narrow the offer according to key parameters such as type and size of neck, overall size of the packaging, colour or material. This way, you can easily compare different bottles, pharmaceutical bottles, jars or dispensers and choose the variant that best matches your formulation, dosing method and the visual requirements of your brand.