Yes, the packaging can be used repeatedly if handled correctly and if hygiene principles are observed. Before each new filling, it is necessary to thoroughly clean the bottle, the dispenser and all contact parts, and then disinfect them with a suitable alcohol-based preparation, for example with isopropyl alcohol or plant-based ethanol. Only after complete drying can you refill the packaging, thereby reducing the risk of microbial contamination of the contents.

We recommend first cleaning the dispenser mechanically from product residues, for example by rinsing it in warm water with a mild cleaning agent. It is then appropriate to flush the suction part as well as the channel of the dispenser with clean water and, after drying, to disinfect the surface with an alcohol solution. When cleaning, avoid excessive forceful disassembly of parts that are not intended to be dismantled, in order not to weaken the sealing or damage the spring and the dosing mechanism.

This glass bottle with pump dispenser is suitable in particular for creamy and emulsion formulations with a smooth consistency that can be easily extruded. These include, for example, facial creams, serums with a creamy texture, local treatment preparations or special dermal products intended for application in a smaller amount. For very thick or firmer balms, the dosing may be limited, so it is recommended to test in advance the behaviour of the specific recipe in the packaging.

If you decide not to use the packaging repeatedly, it is appropriate to recycle it according to the material composition indicated in the product parameters. After emptying and basic rinsing, place the glass part of the bottle in the container intended for glass; place the plastic components of the dispenser (including the tube and the top part) in the separated plastic waste, unless otherwise stated in the packaging parameters. Always follow the local rules for waste separation and the information about the material, which you will find in the technical description of the packaging on the product page.

To make the selection of packaging easier, you can use the advanced filter located at the top of the page after clicking on the selected packaging category. In the advanced filter you can set parameters such as neck type, size, colour or material, and thus narrow the offer down only to the packaging that meets your requirements. In this way you can quickly find a suitable bottle, medicine bottle or container for a specific formulation without having to browse through the entire offer at length.

Before the first filling, it is appropriate to visually check the bottle and the dispenser, to rinse them if necessary and then disinfect them with a suitable alcohol, for example with the preparations IPA 99 % or 96 % plant-based ethanol. After disinfection, let all parts dry completely in order to prevent dilution or precipitation of the formulation. When filling, use clean tools (for example spatulas or filling syringes) and avoid contact of the bottle opening with your hands, in order to maintain the highest possible hygiene standard.