The packaging can be used repeatedly if hygienic principles are observed, especially for your own homemade formulations and smaller batches. Before each new filling, the bottle, spray mechanism and tube must be thoroughly cleaned and then disinfected with a suitable alcohol-based preparation, for example using the products IPA 99 % isopropyl alkohol or Ethanol 96 % denaturovaný rastlinný. This reduces the risk of microbial contamination and ensures higher safety in use.

To extend the service life of the nasal spray, it is advisable to use only liquid preparations with low viscosity and without larger undissolved particles that could clog the nozzle. After use, we recommend always closing the packaging carefully with the protective cap of the applicator and storing it in an upright position. When cleaning, avoid aggressive solvents that are not compatible with the plastic used and handle the pump mechanism gently to prevent mechanical damage.

To select a suitable bottle or medicine bottle you can use the advanced filter located at the top of the page after clicking on the relevant packaging category. In the advanced filter you can clearly set parameters such as neck, size, colour or material of the packaging and display only those options that correspond to the intended use. In this way you will quickly find the combination of bottle and closure that will best suit your product and method of dosing.

Before the first filling, we recommend mechanically cleaning the bottle and all parts of the atomizer and, if necessary, disinfecting them with an alcohol-based preparation. After completely drying, pour in the prepared solution using a funnel or a dosing syringe to avoid spillage over the neck and thread. Then screw the atomizer on firmly, press it several times until the system is primed and check the uniformity of the spray. During filling and storage, avoid contact of the bottle neck with non-sterile surfaces in order to reduce the risk of contamination of the contents.

If you decide not to use the packaging repeatedly, we recommend recycling it according to the type of material specified in the parameter table for the product on the Handymade website. Before handing it over to sorted collection, empty the bottle as much as possible and dispose of any remaining contents in accordance with the nature of the substance used. Then separate the packaging into individual parts (bottle body, atomizer, cap) and place them in the appropriate container according to the material designation. By following the recommended recycling rules, you contribute to a more environmentally friendly approach.