Yes, the packaging can be reused if hygiene principles are observed. Before each refilling, we recommend thoroughly cleaning the vial and sprayer and then disinfecting them with a suitable alcohol-based product, for example IPA 99% isopropyl alcohol or ethanol 96% denatured, plant-based. Only after all parts have completely dried is the vial ready to be refilled with a new product.

This packaging is especially suitable for liquid products that are applied in the form of a fine spray – typically facial and body hydrolates, toning waters, hair tonics, aromatherapeutic blends for local use, or hygienic and disinfecting sprays. Thanks to the practical sprayer, it is also ideal for testers and travel sizes where an accurate dose and easy handling are important.

First, we recommend mechanically rinsing the packaging with a suitable cleaning solution, or with warm water and a mild detergent (provided it is compatible with the original contents). After thoroughly rinsing with clean water, allow all parts to dry completely. It is then important to disinfect the internal surfaces and the spraying mechanism using an alcohol solution, for example IPA 99% isopropyl alcohol or ethanol 96% denatured, plant-based. After the alcohol has evaporated and the parts have dried, you can refill the vial.

If you decide not to reuse the packaging, we recommend recycling it in accordance with the rules specified in the product parameters. The glass part of the vial should be emptied, cleared of product residues, and placed in the container designated for glass according to local waste sorting regulations. The plastic sprayer (including the dip tube) must be separated and placed in the appropriate plastics fraction, if your municipality’s collection system allows it. Before recycling, it is always advisable to check the current local waste sorting rules and follow the recommendations for the specific material type listed in the product parameter table.

To select a suitable vial, bottle, or other packaging, you can use the advanced filter in the packaging categories. After clicking on the selected category, you will find the filter at the top of the page, where you can easily choose parameters such as neck type and diameter, packaging size, color, and material. This allows you to quickly select packaging that matches your product and the desired dosing method.

Yes, thanks to its smaller volume, this glass pharmaceutical vial with sprayer is also practical for development batches, stability testing, or sampling. It allows you to monitor the behavior of the formula in real packaging and verify compatibility with the sprayer (dosing, possible sedimentation, change in viscosity, or potential clogging). Before serial filling, we always recommend performing your own compatibility test of your specific formulation with this type of packaging.