GLASS BOTTLES 30 ml
Clear Frosted Glass Bottle, White Dropper, 30 ml
A frosted glass bottle with a volume of 30 ml and a white dropper with a tamper-evident ring is used for filling and dispensing liquid cosmetic products drop by drop. full description
Lowest price in the last 30 days: €0.98
Total for 1 pcs: €0.98
Quantities add up across all combinations of this bottle.
Product description
A frosted glass bottle with a volume of 30 ml and a white dropper with a tamper-evident ring is used for filling and dispensing liquid cosmetic products drop by drop. It is suitable for face serums, face oils and oil blends, where only a small amount is applied and an exact dose matters. The set is declared as suitable for contact with cosmetic products.
The frosted glass partly conceals the contents from the outside and the white dropper matches it in colour, so the finished product looks uniform even without a label. The bottle and dropper are supplied as a ready-made combination, so you do not need to look for a closure for the neck separately.
What it is suitable for
- Face serums – both water-based and oil-based, where a few drops are applied to the face.
- Face and hair oils – pure vegetable oils as well as blends with essential oils. The dropper dispenses without spilling over.
- Alcohol-based and herbal preparations – tinctures and concentrates for cosmetic use. Glass does not absorb the scent or colour of the contents.
- Samples and test batches – a small volume is enough to check a recipe before you make a larger quantity.
How the set works
The dropper has a glass tube that reaches almost to the bottom of the bottle, a silicone head and a plastic screw closure. Squeezing the head draws in the contents, and when you release it gently, the contents are dispensed drop by drop. Even the last part of the contents can be taken out without tilting the bottle.
The tamper-evident ring on the closure shows whether the bottle has been opened after filling. When the closure is unscrewed for the first time, the ring separates from the closure and stays on the neck, which confirms that the packaging is intact when you sell finished products. After opening, the closure seals with a standard thread and the dropper continues to be used as normal.
The contents come into contact with the glass of the tube and the silicone of the head, not with ordinary plastic. The set is therefore also suitable for oils with a higher proportion of essential oils.
Volume and filling
The nominal volume is the amount the bottle is intended for under normal filling. The total brimful volume is the physical volume up to the neck, and you can find it in the product parameters. The difference between them is a reserve for the dropper, which pushes part of the contents upwards when it is screwed in, and for the expansion of the contents with changes in temperature.
Fill the bottle up to the nominal volume, never to the brim. If it is filled up to the neck, the contents overflow through the thread when the dropper is inserted and the closure then does not seal.
With thicker oil serums, let the filled bottle stand for a while so that air bubbles escape, and only then insert the dropper. The level settles and the dropper screws in without overflow.
Good to know
- Preparation before first filling – we recommend washing the bottle and dropper, disinfecting them with isopropyl alcohol or ethanol and letting them dry completely. Residual water in an oil-based product can shorten its shelf life.
- Glass and heat – do not fill hot contents into the bottle. A sudden change in temperature can damage the glass, so emulsions and serums should be filled only after they have cooled.
- Reuse – after thorough washing and disinfection, the bottle can be used again. Clean the dropper separately: rinse the tube and check that the silicone head returns to its original shape after squeezing.
- Light – frosted glass visually conceals the contents, but it does not protect them from light the way amber glass does. For contents sensitive to light, dark glass has proved its worth.
- Custom combination – closures with the same neck type as stated in the parameters, and other ready-made sets, are available in the Handymade range. For a custom combination, we recommend checking the tightness and dispensing with your specific formulation.
- Recycling – the bottle belongs in glass waste. The dropper consists of glass, silicone and plastic, so it is sorted separately from the bottle.
Frequently asked questions
Parameters
Clear frosted glass bottle, 18 mm, 30 ml
Tamper Evident Glass Dropper, White, 71 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



















































