Clear Plastic Bottle, Transparent Spray with Glossy Silver Collar, 150 ml

A clear PET bottle with a volume of 150 ml and a mini trigger sprayer with a 24/410 neck finish make a ready-to-use packaging set for toners, hydrosols, refreshing face and body sprays, and hair sprays. The clear plastic shows the colour and clarity of the contents, so it suits products where you want to see the fill and its condition. The bottle is light and does not break like glass, which you will appreciate for products that end up in the bathroom, in a handbag or on trips. The sprayer has a clear head and a silver glossy collar, which gives the simple packaging a refined look.

Both the bottle and the sprayer are suitable for contact with cosmetic products.

How the set works

The sprayer screws onto the bottle and draws the contents up from the bottom through a dip tube. Each press releases approximately 0.12 ml of mist. A toner is applied to the face in a thin layer, and a hair spray or refreshing body spray is applied in the same way: several presses cover a larger area.

• Clear PET – you can see the amount of product and any cloudiness or sediment, and the packaging does not add any colour to the contents.
• Plastic instead of glass – the bottle withstands normal handling and transport in a bag.
• Mist, not a jet – the sprayer disperses the liquid into fine droplets, so it suits watery and thin formulations.
• Aluminium collar – the silver glossy ring on the sprayer completes the look of the whole set.

Suitable for products such as

The bottle with a sprayer is intended for liquid, low-viscosity products that pass through the dip tube and nozzle without clogging:

• face and body toners, hydrosols and floral waters,
• refreshing face sprays, for example with glycerine or a low dose of active ingredients,
• hair sprays, liquid leave-in conditioners, sea salt sprays.

Thick emulsions, gels and oils are not suitable for a mini trigger sprayer. The mist is uneven with them and the nozzle clogs.

Nominal and total volume

The nominal volume of 150 ml is the amount the bottle is designed for in normal filling. The total brimful volume, that is, the physical volume up to the neck, is slightly larger and you can find it in the parameters. The difference provides a reserve for the dip tube and the body of the sprayer, which take up part of the inner space, and for the expansion of the contents when the temperature changes. Therefore fill only up to the nominal volume, so that the contents are not pushed out through the neck when the sprayer is screwed on.

Good to know

Before first use, wash the bottle and the sprayer, rinse them with isopropyl alcohol or ethanol and let them dry completely. Follow the same procedure when refilling: rinse the sprayer several times with clean water and then with alcohol, so that no residues of the previous product settle in the nozzle and the dip tube.

With high concentrations of essential oils, fragrance compositions or solvents, check in advance how the packaging behaves with your specific formulation. Do not expose the packaging to aggressive chemicals or heat, and do not fill it with hot contents.

Clear packaging does not protect the contents from light. Store products containing light-sensitive substances, for example some vitamins or plant extracts, in the dark or choose coloured packaging.

The bottle is made of PET and goes in plastic recycling. The sprayer combines polypropylene and an aluminium collar, so separate it from the bottle before recycling. You can find closures with the same 24/410 neck finish and other ready-made bottle and closure combinations in the Handymade range. If you make your own combination, we recommend checking the tightness and dispensing with your specific formulation.

Frequently asked questions