The glass bottle with roll-on applicator is suitable for most oil-based and watery cosmetic formulations, such as perfume oils, serums or light solutions. For very thin or, on the contrary, very thick products, we recommend first testing the flow and dosing through the roll-on ball to ensure smooth and comfortable application. It is always advisable to perform a stability test of the product in the packaging over several days.

The bottle can be reused if proper hygiene principles are followed. Before each new filling, the packaging must be thoroughly cleaned and then disinfected with an appropriate agent, for example isopropyl alcohol or ethanol. For disinfection we recommend the products IPA 99% isopropyl alcohol or Ethanol 96% denatured plant-based. Only after completely drying can you refill the bottle, ideally with the same or a similar type of product, to minimize the risk of undesirable interactions with residues of the previous formulation.

Before reuse we recommend first mechanically rinsing the bottle with a suitable cleaning solution (for example warm water with mild soap or a non-aggressive cleaner), then rinsing several times with clean water and, after drying, disinfecting the packaging. To disinfect the inner surface, you can use a small amount of isopropyl alcohol or ethanol, leave it to act briefly and then allow the bottle to dry completely in the air. Only after complete evaporation of the alcohol is the packaging ready for refilling.

If you decide not to continue using the bottle, we recommend recycling it according to the material composition stated in the product parameters. The glass part of the bottle can usually be placed in the container designated for glass once you have removed any remaining contents. Components made of other materials (for example the plastic or metal part of the roll-on system) should be separated according to local waste-sorting rules. Always follow the current recycling recommendations in your municipality and the material labelling indicated with the product on Handymade.sk.

When choosing suitable packaging, we recommend using the advanced filter which you can find at the top of the page after clicking on the relevant packaging category. Thanks to the filter you can conveniently sort bottles, vials, jars or other containers according to parameters such as neck, size, colour and material. By combining these filters you can quickly narrow down the selection to packaging that best matches your product type, the desired dosing and the visual style of your brand.